Modules

Showing 1-47 of 47 item(s)

Modules

Bluetooth Transceiver RF MasterModule for Arduino - HC-06

Reference:

DET520

HC-06 Bluetooth Serial Module (MPN: HC-06) — a compact TTL wireless serial port replacement supporting 3.6–5.5V input, default 9600 baud, with built-in antenna and up to 30ft range. Ideal for Arduino, MCU, and embedded projects.

View

Out of Stock

Modules

Bluetooth Module for Arduino - HM10

Reference:

DET523

€10.95

HM-10 Bluetooth 4.0 BLE module based on the Texas Instruments CC2541 chipset. Features on-board voltage regulation, 5V TTL compatibility, and UART/AT-Command interface. Ideal for Arduino and microcontroller wireless projects targeting Android and iOS devices.

View

Out of Stock

Modules

Bluetooth Module RF Transceiver HC-05

Reference:

DET519

€12.95

HC-05 Bluetooth RF Transceiver Module – enables wireless serial (UART) communication between Arduino or other microcontrollers and Bluetooth-enabled devices. Supports Master and Slave modes via Bluetooth 2.0 + EDR protocol.

Last items in stock

Modules

Bluetooth 5.0 BLE module RF transceiver Master and Slave HC-42

Reference:

DET522

€14.95

HC-42D Bluetooth 5.0 BLE transceiver module, 2.4GHz ISM band, 1.8–3.6V operating voltage, PCB internal antenna, GFSK modulation, up to 2Mbps air rate. Ideal for low-power wireless projects.

In Stock

Soil Hygrometer / Moisture Detection Module

Sensors

Soil Hygrometer / Moisture Detection Module

Reference:

DET526

€3.35

Soil Hygrometer / Moisture Detection Module for Arduino and compatible boards. Detects soil moisture levels and outputs a digital HIGH/LOW signal via the D0 pin. Ideal for building automatic plant watering systems and smart garden projects.

In Stock

Rain/Raindrops Detection Sensor - Weather Humidity Module

Sensors

Rain/Raindrops Detection Sensor - Weather Humidity Module

Reference:

DET525

€3.25

FR-04 Rain & Raindrop Detection Sensor Module with LM393 comparator, dual analog/digital output, and 3.3V–5V operating voltage. Compatible with Arduino, ESP32, and Raspberry Pi projects.

In Stock

Sensors

Water Level Detection Sensor Module

Reference:

DET527

€2.95

Water Level Detection Sensor Module for Arduino and microcontrollers — detects water presence and measures depth via exposed parallel traces acting as a variable resistor. Ideal for rain detection, tank monitoring, and flood alert systems.

In Stock

RFID Controller Breakout Board MF RC-522- 13.56MHz

Sensors

RFID Controller Breakout Board MF RC-522- 13.56MHz

OEM

Reference:

DET625

€5.95

RC522 RFID Controller Breakout Board operating at 13.56MHz with SPI interface. Supports read/write to MIFARE tags and cards. Compatible with Arduino, AVR, ARM, PIC and other microcontrollers.

In Stock

Keypads

Infrared Remote Control Module

Reference:

SWK800

€4.00

HX1838 Infrared Remote Control Receiver Module — 3.3V/5V compatible IR sensor with 38kHz carrier frequency reception, 10K pull-up on signal pin, and range up to 8 meters. Ideal for Arduino, ESP32, and Raspberry Pi projects.

In Stock

Keypads

Membrane 1×4 Matrix Keypad

Reference:

SWK205

€2.00

Membrane 1×4 Matrix Keypad with FPC circuit — 4 independent keys, adhesive backing, compatible with Arduino, ESP32, Raspberry Pi. Pad size: 68×20mm, total length: 107mm.

In Stock

Keypads

Membrane 3x4 Matrix Keypad

Reference:

SWK220

€2.50

Membrane 3x4 Matrix Keypad with 12 keys arranged in a telephone-style grid. Passive matrix interface requiring only 7 GPIO pins (4 rows + 3 columns). Features self-adhesive backing, Dupont 2.54mm connector, and 1 million cycle life expectancy. Compatible with Arduino, ESP32, and most microcontrollers.

In Stock

Keypads

Membrane 4x4 Matrix Keypad

Reference:

SWK230

€2.75

Membrane 4x4 Matrix Keypad with 16 keys (0–9, A–D, *, #) arranged in a 4-row × 4-column grid. Interfaces with any microcontroller using just 8 GPIO pins. Features adhesive backing for easy mounting and ultra-thin profile.

View

Out of Stock

Keypads

Membrane 4x5 Matrix Keypad

Reference:

SWK250

€3.00

Membrane 4x5 Matrix Keypad with 20 keys arranged in a 4-column × 5-row grid. Ultra-slim design with adhesive backing, 9-pin output, and 3.3V–5V operating voltage — ideal for Arduino, ESP32, and breadboard prototyping.

In Stock

Sensors

Photo Interrupter Module KY-010

Reference:

DET560

€2.00

KY-010 Photo Interrupter Module with digital output and built-in LED indicator. Detects beam interruptions and outputs a digital signal — ideal for Arduino projects requiring object detection or counting.

In Stock

Relay

1 Channel 5V Relay Module KY-019

Reference:

DET569

€1.95

KY-019 1-Channel 5V Relay Module lets your Arduino switch AC 250V/10A or DC 30V/10A loads with just a 5mA trigger signal. Perfect for controlling home appliances, lights, and motors from a microcontroller.

In Stock

Modules

VGA Camera 300KP Module - OV7670

Reference:

DET530

€5.50

OV7670 VGA Camera 300KP Module — single-chip image sensor with SCCB interface, 8-bit data output, and up to 30 fps at VGA resolution. Compact and low-voltage design ideal for Arduino and embedded vision projects.

In Stock

Keypads

Dual-axis XY Joystick Module KY-023

Reference:

DET573

€2.75

KY-023 Dual-Axis XY Joystick Module — PS2-style analog joystick with two 10 kΩ potentiometers (X/Y axes) and a built-in push-button switch. Works with Arduino, ESP32, and Raspberry Pi. Plug-and-play, no libraries needed.

View

Out of Stock

Modules

Magnetic Reed Switch Module KY-025

Reference:

DET575

€2.50

KY-025 Magnetic Reed Switch Module with LM393 comparator, digital output (0/1), operating voltage 3.3V–5V. Compatible with Arduino, ESP32, and Raspberry Pi projects. Ideal for detecting magnetic fields in door/window sensors, relays, and automation systems.

In Stock

Motors

DC Motor Speed Controller Module 4.5-35v

Reference:

MOT095

€7.50

DC Motor Speed Controller Module operating on 4.5–35V DC with PWM control (20 kHz, 1–100% duty cycle), up to 5A / 90W output. Compact 30×26×14mm module with potentiometer knob for smooth, stepless speed adjustment — ideal for makers and engineers.

In Stock

Relay

5V Relay Module - 1 Channel - Low Level Trigger

Reference:

REL705

€2.50

5V Single-Channel Relay Module with Low Level Trigger for Arduino, ESP32 and other microcontrollers. Controls AC/DC loads up to 220V AC with optocoupler isolation and status LED indicators.

In Stock

Relay

5V Relay Module - 2 Channel

Reference:

REL710

€4.50

5V 2-Channel Relay Module — SPDT interface board controlled directly by Arduino or any MCU. Rated 5VDC coil, up to 10A at AC250V / DC30V, with status LEDs per channel.

In Stock

Relay

5V Relay Module - 4 Channel

Reference:

REL720

€6.50

5V 4-Channel Relay Module – SPDT contacts rated AC250V/10A & DC30V/10A, 50–60mA driver current per channel. Control high-current appliances directly from any 5V MCU such as Arduino.

Last items in stock

Real Time Clock (RTC) Memory Module DS3231

Modules

Real Time Clock (RTC) Memory Module DS3231

Reference:

DET535

€4.25

DS3231 Real Time Clock (RTC) Memory Module — ultra-accurate I2C RTC with integrated temperature-compensated crystal oscillator (TCXO), battery backup, and full date/time tracking. Ideal for Arduino, ESP32, and Raspberry Pi projects.

View

Out of Stock

Two Channel Motor Driver Board 2.5-12v L9110S

Two Channel Motor Driver Board 2.5-12v L9110S 2

Motors

Two Channel Motor Driver Board L9110S

Reference:

MOT085

€3.95

The L9110S Dual Motor Driver Board (MPN: L9110S) is an ultra-compact H-Bridge module designed to drive two DC motors or one bipolar stepper motor from any 5V microcontroller such as Arduino or Raspberry Pi. It replaces bulky L298N modules in space-constrained robotics and STEM builds.

View

Out of Stock

Motor Driver Board L293D Shield Module 2

Motors

Motor Driver Board L293D Module

Reference:

MOT087

€4.50

The L293D Motor Driver Board (MPN: L293D) is a compact Dual H-Bridge module that gives any microcontroller independent speed and direction control over up to 2 DC motors or 1 stepper motor via PWM signals up to 5 KHz.

Last items in stock

Motors

DC Motor Speed Controller Module DC 1.8-15V

Reference:

MOT094

€7.50

MPN 19045 — DC Motor Speed Controller Module for 1.8V–15V DC motors. Controls speed via PWM (0–100% duty cycle), 2A continuous output, 30W max power, compact 32×32×15mm form factor.

In Stock

Motors

Dual Motor Driver Module L298N

Reference:

MOT088

€5.50

The L298N Dual Motor Driver Module (MPN: L298N) is a high-current H-Bridge controller that gives any microcontroller full speed and direction control over 2 DC motors or 1 bipolar stepper motor. Built around the L298N IC with an onboard heatsink, it bridges the gap between low-power logic and high-power motor loads — ideal for robotics, CNC and automation...

In Stock

Modules

SD Card Module Read and Write

Reference:

DET630

€2.95

SD Card Module with SPI interface, compatible with 5V and 3.3V systems. Features a 2×8 double pin-header (2.54mm) and supports SD/MMC cards for easy data logging and file storage with Arduino, ESP32, and more.

In Stock

Modules

Micro SD Card Module Read and Write

OEM

Reference:

DET631

€2.50

Micro SD Card Module for reading and writing Micro SD and SDHC cards via SPI interface. Supports 5V and 3.3V logic levels with onboard LDO regulator and level conversion circuit. 6-pin interface (GND, VCC, MISO, MOSI, SCK, CS).

In Stock

Sensors

RFID Card 13.56MHz

OEM

Reference:

DET6250

€0.95

RFID Card 13.56MHz — ISO/IEC 14443A compatible, credit-card format (86×54×0.8mm) in PVC, designed to work with RC522 RFID reader modules. Supports a read range of up to 90mm and operates in temperatures from -20°C to 55°C.

In Stock

16-Channel 12-bit PWM/Servo Driver Interface

Modules

16-Channel 12-bit PWM/Servo Driver Interface

Kuongshun

Reference:

ARD633

€8.95

The PCA9685 16-Channel 12-bit PWM/Servo Driver by Kuongshun lets any I2C microcontroller control up to 16 PWM outputs simultaneously — perfect for multi-servo robotics, LED dimming, and DC motor projects. With an onboard free-running clock and adjustable 40Hz–1.6kHz frequency, it offloads PWM generation entirely from your MCU.

View

Out of Stock

Modules

Led Matrix 8x8 Red with MAX7219

Reference:

LED760

€4.25

MAX7219 LED Matrix 8x8 Red – compact SPI dot matrix display module, ideal for Arduino, ESP32 and Raspberry Pi projects. Control 64 red LEDs with just 3 data lines and add scrolling text, animations or visual effects to any build.

In Stock

DC-DC Converter Step-Down 1.25-32V 5A with LED Display - XL4015

DC-DC Converter Step-Down 1.25-32V 5A with LED Display - XL4015 2

Modules

DC-DC Converter Step-Down 4-38V 5A with LED Display - XL4015

Kuongshun

Reference:

DET825

€8.75

XL4015 DC-DC Step-Down Converter by Kuongshun — adjustable 4–38V input, 1.25–36V output, up to 5A with built-in LED voltmeter display. High-efficiency buck module with thermal shutdown, current limit, and short-circuit protection for power projects.

View

Out of Stock

Wireless Transceiver Module with Antenna 2.4GHz nRF24L01

Modules

Wireless Transceiver Module with Antenna 2.4GHz nRF24L01

Reference:

ARD680

€7.90

nRF24L01 2.4GHz Wireless Transceiver Module with external antenna, PA & LNA circuit for extended range up to 800–1000m. Compatible with Arduino, ESP32, Raspberry Pi via SPI.

In Stock

Lithium Battery Charger and Protection Module 1A USB-C - TP4056

Modules

Lithium Battery Charger and Protection Module 1A USB-C - TP4056

Kuongshun

Reference:

PCB540

€1.25

TP4056 USB-C Lithium Battery Charger & Protection Module (1A) by Kuongshun. Charges single-cell Li-Ion/LiPo batteries via CC/CV method with built-in overcharge, over-discharge and short-circuit protection.

In Stock

Triple Axis Gyroscope & Accelerometer IMU - MPU6050

Sensors

Triple Axis Gyroscope & Accelerometer IMU - MPU6050

Kuongshun

Reference:

DET770

€4.95

The MPU-6050 (MPN: MPU-6050, Brand: Kuongshun) is a 6-axis IMU module combining a 3-axis gyroscope and 3-axis accelerometer in a single chip. It communicates via I2C, features a 16-bit ADC per channel, and supports a wide power supply range of 4.3–9V via an on-board LDO regulator.

Upon Request

5-15W Fast Charging Wireless Charger Module USB-C

Modules

5-15W Fast Charging Wireless Charger Module USB-C

Reference:

PCB591

€8.95

Fast Charging Wireless Charger Module with USB-C input, supporting 5W to 15W output. PCBA board ready for DIY integration into smart devices, custom enclosures, and embedded applications. Features quadruple protection for safe, efficient wireless power transfer.

Last items in stock

Universal Portable 15W Fast Charging Wireless Charger USB-C

Modules

Universal Portable 15W Fast Charging Wireless Charger USB-C

Reference:

PCB592

€7.95

Universal Portable 15W Fast Charging Wireless Charger Module with USB-C input, QI standard compliance, and CE/FCC certification — ideal for DIY builds, custom furniture, and embedded electronics projects.

Last items in stock

FT232RL USB to TTL Serial Converter Module

Modules

FT232RL USB to TTL Serial Converter Module

Reference:

PCB531

€5.95

FT232RL USB to TTL Serial Converter Module – reliable FTDI-based adapter for programming Arduino Pro Mini, ESP8266, ESP32 and other microcontrollers via UART. Plug-and-play USB connection with driver support.

Last items in stock

AT24C256 I2C Interface EEPROM Memory Module (256 Kbit)

Modules

AT24C256 I2C Interface EEPROM Memory Module (256 Kbit)

Reference:

DET641

€4.95

The AT24C256 I2C EEPROM Memory Module offers 256 Kbit (32 KB) of non-volatile storage via a simple 2-wire I2C interface. Address jumpers (A0, A1, A2) allow up to 8 modules on the same bus — ideal for Arduino, ESP32, and Raspberry Pi projects.

In Stock

DC 5V to 3.3V Step-Down Power Supply Module - AMS1117-3.3...

DC 5V to 3.3V Step-Down Power Supply Module - AMS1117-3.3... 2

Modules

DC 5V to 3.3V Step-Down Power Supply Module - AMS1117-3.3 LDO (800mA)

Reference:

DET820

€1.95

AMS1117-3.3 LDO Step-Down Module — converts DC 5V (up to 7V) to a stable 3.3V output at up to 800mA. Compact and reliable, ideal for powering ESP32, ESP8266, and other 3.3V peripherals from a 5V supply.

In Stock

Modules

ACS712 ±30A Hall Current Sensor Module

Reference:

DET810

€3.95

ACS712 ±30A Hall Effect Current Sensor Module — measures DC and AC current up to ±30A with full electrical isolation. Compatible with Arduino, ESP32, and Raspberry Pi via analog output. Ideal for power monitoring and motor control projects.

Last items in stock

Adeept Ultimate Sensor Kit 42 modules for Arduino UNO in storage box

Sensors

Adeept Ultimate Sensor Kit: 42 Modules for Arduino UNO

Adeept

Reference:

KIT1061

€99.95

The Adeept Ultimate Sensor Kit (ADA016) bundles 42 sensors and modules purpose-built for Arduino UNO, turning any breadboard session into a full-scale learning lab. Packed with 35 step-by-step PDF lessons and complete sample code, it is the go-to starter pack for makers, students, and robotics educators alike.

In Stock

Audio Amplifier Module 4V-12V DC with Volume Control - LM386

Modules

Audio Amplifier Module 4V-12V DC with Volume Control - LM386

Reference:

DET606

€3.50

LM386 Audio Amplifier Module operating at 4V–12V DC with on-board 10K volume potentiometer and screw terminal for easy speaker connection. Ideal for Arduino projects, portable speakers, and DIY audio applications.

In Stock

Modules

433MHz RF Transmitter & Receiver Kit for Arduino

Reference:

ARD685

€2.95

FS1000A 433MHz RF Transmitter & Receiver Kit — operating frequency 433.92 MHz, TX voltage 3V–12V, RX voltage 5V DC. ASK/OOK modulation for simple one-way wireless data transmission with Arduino, ESP32, and Raspberry Pi.

View

Out of Stock

LM2596 Step-Down Buck Module with LED Display

Modules

LM2596 Step-Down Buck Module with LED Display

Reference:

DET823

€7.95

The LM2596 Step-Down Buck Module (MPN: NA068) accepts 4.0V–40V DC input and delivers an adjustable 1.25V–37V DC output. A built-in red LED display shows real-time voltage readings, making it ideal for DIY power supply projects, Arduino, and Raspberry Pi builds.

View

Out of Stock

Two Channel Motor Driver Module TB6612FNG DRI0044 DFRobot

Two Channel Motor Driver Module TB6612FNG DRI0044 DFRobot 2

Modules

Motor Driver 1.2A Dual DC / Stepper TB6612FNG DFRobot

DFRobot

Reference:

MOT089

€9.95

TB6612FNG DRI0044 by DFRobot — a compact Dual H-Bridge motor driver delivering 1.2A per channel for two DC motors or one stepper. MOSFET-based design runs cooler and more efficiently than traditional L298N modules, with full PWM speed and direction control.

Last items in stock

In this category find modules for Arduino with which everyone can create custom hardware in an economical and easy way. Here you can find displays, keyboards, joysticks, bluetooth, relays and more.

Monday	09:00 - 18:30
Tuesday	09:00 - 18:30
Wednesday	09:00 - 14:30
Thursday	09:00 - 18:30
Friday	09:00 - 18:30
Saturday	09:30 - 13:30