Motors

DC Motors

Servo Motors

Stepper Motors

Geared Motors

Motor Mounts

Motor Drivers

Showing 1-50 of 52 item(s)

Gearbox GIGO - 4 Different Simultaneous Movements

On sale!
-€8.00

Gear Boxes

Gearbox GIGO - 4 Different Simultaneous Movements

Reference:

GEA074

€7.00 €15.00

In Stock

Motors

Miniature Vibration Motor 3V DC

Reference:

MOT0021

€3.50

View

Out of Stock

Motors

DC Motor Speed Controller Module DC 1.8-15V

Reference:

MOT094

€7.50

MPN 19045 — DC Motor Speed Controller Module for 1.8V–15V DC motors. Controls speed via PWM (0–100% duty cycle), 2A continuous output, 30W max power, compact 32×32×15mm form factor.

In Stock

Motors

Dual Motor Driver Module L298N

Reference:

MOT088

€5.50

The L298N Dual Motor Driver Module (MPN: L298N) is a high-current H-Bridge controller that gives any microcontroller full speed and direction control over 2 DC motors or 1 bipolar stepper motor. Built around the L298N IC with an onboard heatsink, it bridges the gap between low-power logic and high-power motor loads — ideal for robotics, CNC and automation...

In Stock

Motors

SERVO motor 180 degree 12kg S3003

Kuongshun

Reference:

MOT475

€9.95

S3003 Servo Motor 180° 12kg by Kuongshun — standard analog servo with PWM control, 4.8–6V operation, and up to 11kg/cm stall torque. Ideal for robotics, RC vehicles, and Arduino-based projects.

View

Out of Stock

Motors

SERVO motor 6kg.cm Continuous Rotation

Kuongshun

Reference:

MOT480

€17.50

FS5106R Continuous Rotation Servo Motor by Kuongshun — 6kg.cm torque at 6V, 360° full rotation, analog control, standard 25T (Futaba/Feetech) spline. Compatible with Arduino, ESP32 and any servo library. Ideal for simple wheeled robots and motorized projects.

In Stock

Gear Boxes

Gearbox 3-6V 1:48 Ratio 125RPM

Reference:

GEA0620

€3.95

Last items in stock

Arduino Shields

16 Channel I2C PWM/Servo Driver Shield

Kuongshun

Reference:

ARD632

€9.95

PCA9685 16-Channel 12-bit PWM/Servo Driver Shield by Kuongshun — I2C-controlled, up to 1.6 kHz PWM frequency, stackable design for expanding servo and motor outputs on any Arduino project without consuming extra processing cycles.

In Stock

16-Channel 12-bit PWM/Servo Driver Interface

Modules

16-Channel 12-bit PWM/Servo Driver Interface

Kuongshun

Reference:

ARD633

€8.95

The PCA9685 16-Channel 12-bit PWM/Servo Driver by Kuongshun lets any I2C microcontroller control up to 16 PWM outputs simultaneously — perfect for multi-servo robotics, LED dimming, and DC motor projects. With an onboard free-running clock and adjustable 40Hz–1.6kHz frequency, it offloads PWM generation entirely from your MCU.

View

Out of Stock

Micro Metal Geared Motor GA12-N20 3v 1000RPM

Gear Boxes

Micro Metal Geared Motor GA12-N20 3v 1000RPM

Reference:

MOT1115

€9.50

In Stock

Micro Metal Geared Motor GA12-N20 6v 1000RPM

Gear Boxes

Micro Metal Geared Motor GA12-N20 6v 1000RPM

Reference:

MOT1215

€9.50

View

Out of Stock

Micro Metal Geared Motor GA12-N20 12v 1000RPM

Gear Boxes

Micro Metal Geared Motor GA12-N20 12v 1000RPM

Reference:

MOT1315

€9.50

Last items in stock

Gear Boxes

Gearbox Motor TT 1:120 Single Shaft 3V-6V 90 RPM

Reference:

GEA0625

€3.95

This high-performance DC Gearbox Motor TT 1:120 Single Shaft delivers an excellent balance of speed and mechanical power for demanding educational projects. Operating within a Voltage Range of 3V - 6V DC, it achieves a swift 90 RPM no-load speed (72 RPM at load) and provides a strong Stall Torque of 1.4Kg/cm. Measuring just 64.2 x 22.5 x 18.8mm, it is the...

View

Out of Stock

Motors

Stepper Motor 12V

Reference:

MOT420

€4.50

The 28BYJ-48 Stepper Motor 12V is a compact unipolar stepper motor ideal for small projects, robotics, and experimenting with motion control. With a built-in gear reduction and mounting plate, it is a perfect entry-level stepper for makers and students.

In Stock

Gear Boxes

Gearbox Motor TT 1:220 Single Shaft 3V-6V 54 RPM

Reference:

GEA0635

€3.95

This high-precision DC Gearbox Motor TT 1:220 Single Shaft is engineered for applications demanding precise motion control and dependable power, delivering an Output Torque of 0.15kg.cm - 0.6kg.cm. Operating within a Voltage Range of 3V - 6V DC, delivering speeds up to 54 RPM, and built in a compact 70 x 19 x 22.5mm chassis, it stands as the ideal...

View

Out of Stock

Gear Boxes

Vibration Motor 3v - 12mm

Reference:

MOT0034

€2.95

View

Out of Stock

Motors

SERVO motor 180 degree 12kg MG995

Kuongshun

Reference:

MOT476

€12.50

MG995 Servo Motor 12kg by Kuongshun — a high-torque 180° standard servo controlled via PWM signal. Operating voltage 4.8V–6.6V, torque up to 11kg/cm at 6V. Includes mounting accessories for easy integration with Arduino, ESP32 and robotics projects.

Last items in stock

DC Motors

Miniature DC Vibration Motor 3V 6x14mm

OEM

Reference:

MOT0026

€3.50

View

Out of Stock

Gearbox 3-6V 1:48 Ratio 125RPM Singe Shaft

Gear Boxes

Gearbox 3-6V 1:48 Ratio 125RPM Singe Shaft

Reference:

GEA0621

€3.95

Electric DC motor with 1:48 gearbox and single shaft, operating at 3–6V with 125RPM. Perfect for robotics, STEM kits, and Arduino projects.

View

Out of Stock

Motor Drivers

Stepper Driver Board Blue - ULN2003

Reference:

MOT433

€2.50

The ULN2003 Driver Board (AA088) is the ideal solution for controlling stepper motors and high-current loads from your Arduino or Raspberry Pi.

In Stock

Motors

Micro SERVO motor SG90 Continuous Rotation 360°

Reference:

MOT4601

€7.50

SG90-360 Micro Servo Motor with 360° continuous rotation. Weighing just 9g, it is ideal for robotics, wheeled platforms, and any project requiring unlimited rotation. Fully compatible with Arduino and most microcontrollers.

View

Out of Stock

Standard Servo Motor - High Torque, Analog SG5010

Motors

Standard Servo Motor - High Torque, Analog SG5010

Reference:

MOT490

€8.50

SG5010 Standard Servo Motor – high-torque analog servo with metal gears, 180° rotation, ~39g, compatible with Arduino, Raspberry Pi and PIC microcontrollers. Ideal for RC models, robotic arms and educational projects.

In Stock

Two Channel Motor Driver Module TB6612FNG DRI0044 DFRobot

Two Channel Motor Driver Module TB6612FNG DRI0044 DFRobot 2

Modules

Motor Driver 1.2A Dual DC / Stepper TB6612FNG DFRobot

DFRobot

Reference:

MOT089

€9.95

TB6612FNG DRI0044 by DFRobot — a compact Dual H-Bridge motor driver delivering 1.2A per channel for two DC motors or one stepper. MOSFET-based design runs cooler and more efficiently than traditional L298N modules, with full PWM speed and direction control.

Last items in stock

Motors

Vibrating Mini Motor Disc - Adafruit

Adafruit

Reference:

MOT0035

€6.00

Upon Request

Motors

Stepper Driver Board - ULN2003

Reference:

MOT432

€2.50

ULN2003 Stepper Motor Driver Board is to use the ULN2003 DARLINGTON ARRAYS to drive the 4-phase 5-wire stepper.

View

Out of Stock

Gear Boxes

Gearbox + Motor Assembly Kit 1.5-4.5v

Reference:

GEA075

€8.50

In Stock

Motors

Motor 1.5-4.5V MM18

Reference:

MOT010

€1.30

View

Out of Stock

Motors

Motor 3-6V MM28

Reference:

MOT015

€1.75

Last items in stock

Motors

Motor 6-12V RE300 or RC23

Reference:

MOT026

€5.95

View

Out of Stock

Motors

Solar Water Pump 1.5V Magnetic

Reference:

MOT052

€8.00

Last items in stock

Motors

Mounting Clip Adhesive

TickiT

Reference:

MOT070

€0.95

In Stock

Motors

Stepper Motor 5V

Reference:

MOT410

€4.50

The 28BYJ-48 is a compact 5V unipolar stepper motor with a built-in 1/64 reduction gear set, delivering 512 effective steps per revolution. Ideal for makers, students, and hobbyists experimenting with motion control in small-scale projects.

View

Out of Stock

Geared Motors

Miniature Vibration Motor 3V DC

Reference:

MOT002

€4.00

View

Out of Stock

Motors

Motor Mounting Clip MM18 / MM28

Reference:

MOT060

€0.60

View

Out of Stock

DC Gear Motor (Gearbox) 6-9V 1:48 Single Shaft

Gear Boxes

DC Gear Motor (Gearbox) 6-9V 1:48 Single Shaft

Reference:

GEA067

€4.00

View

Out of Stock

Motors

Micro SERVO motor 180 degree SG90

Reference:

MOT460

€4.50

The SG90 micro servo motor is a 9g PWM-controlled servo offering 180° rotation, ideal for Arduino robotics, RC models, and maker projects requiring precise angular positioning.

In Stock

Motors

Micro SERVO motor 180 degree MG90S

Reference:

MOT462

€5.50

The MG90S is a metal gear micro servo motor with 180° rotation, PWM control, and dual ball bearings. Weighing just 13.6g, it delivers up to 2.2 kg·cm torque at 6V — ideal for RC models, robotics, and Arduino projects.

In Stock

Motors

Micro SERVO motor 360 degree FS90R

Reference:

MOT465

€10.90

The FS90R is a continuous rotation micro servo motor by FEETECH, offering 360° open-loop speed and direction control via PWM signal. Compact (9 g) and compatible with Arduino, Raspberry Pi, and any 5V PWM output. Ideal for robotics, wheeled robots, and automation projects.

In Stock

Motors

Servo Controller Board - Tester

Reference:

MOT446

€5.50

DR0277 CCPM Servo Tester & Controller Board — test and calibrate servo motors or ESCs without a microcontroller. Supports manual, automatic, and center/median modes. Input: DC 4.2–6.0V, PWM output: 1.5ms ±0.5ms.

In Stock

Motors

DC Motor Speed Controller Module 4.5-35v

Reference:

MOT095

€7.50

DC Motor Speed Controller Module operating on 4.5–35V DC with PWM control (20 kHz, 1–100% duty cycle), up to 5A / 90W output. Compact 30×26×14mm module with potentiometer knob for smooth, stepless speed adjustment — ideal for makers and engineers.

In Stock

Two Channel Motor Driver Board 2.5-12v L9110S

Two Channel Motor Driver Board 2.5-12v L9110S 2

Motors

Two Channel Motor Driver Board L9110S

Reference:

MOT085

€3.95

The L9110S Dual Motor Driver Board (MPN: L9110S) is an ultra-compact H-Bridge module designed to drive two DC motors or one bipolar stepper motor from any 5V microcontroller such as Arduino or Raspberry Pi. It replaces bulky L298N modules in space-constrained robotics and STEM builds.

View

Out of Stock

Bring your projects to life with our comprehensive range of motors for robotics and automation. Antoniadis Electronics provides readily available motion solutions for makers, students, and professionals across Cyprus.

DC & Geared Motors: Perfect for applications requiring continuous rotation, with gearboxes available for increased torque and precise speed control.
Servo Motors: The ultimate choice for accurate angular positioning, essential for robotic arms and steering mechanisms.
Stepper Motors: Designed for applications requiring absolute positional and step accuracy, such as 3D printers and CNC machines.

To safely power and control your movement, we offer a wide selection of Motor Drivers—essential for bridging your microcontroller (like Arduino or ESP32) with the high-current demands of the motor—along with sturdy motor mounts. Build your next automated system with high-quality components delivered locally in Cyprus.

Monday	09:00 - 18:30
Tuesday	09:00 - 18:30
Wednesday	09:00 - 14:30
Thursday	09:00 - 18:30
Friday	09:00 - 18:30
Saturday	09:30 - 13:30