Components

Showing 1-47 of 47 item(s)

Prototyping Boards (Breadboards)

Breadboard – Full-Size MB-102

Reference:

BRE170

MB-102 Full-Size Breadboard – 830 tie-points, solderless prototyping platform measuring 164 × 54 × 11 mm. Compatible with Arduino, ESP32, and Raspberry Pi projects. Ideal for building and testing circuits without soldering.

View

Out of Stock

Components

SMD Led 3 Colors RGB Module KY-009

Reference:

DET559

€2.50

KY-009 SMD RGB LED Module features a 5050 PWM RGB SMD LED with built-in current-limiting resistors for safe, full-color light mixing. Compatible with Arduino, Raspberry Pi, and other MCUs. Compact 19×14×5 mm form factor.

In Stock

Prototyping Boards (Breadboards)

Jumper Wires M/M Starter Kit 65pcs

Reference:

BRE525

€4.95

65-piece male-to-male jumper wire kit for breadboard prototyping. Assorted lengths (110mm–240mm) and colours, 2.54mm pitch. Compatible with Arduino, Raspberry Pi, ESP32 and all standard breadboards.

In Stock

Components

Two Color LED (Red & Green) Module KY-011

Reference:

DET561

€2.00

KY-011 Two-Color LED Module (Red & Green) — a common-cathode bi-color LED module with 5 mm diffused LED, 150° viewing angle, and 3-pin header for direct use with Arduino. Forward voltage 2.0–2.5 V, wavelengths 571 nm (green) & 644 nm (red).

In Stock

Components

Active Buzzer 3.5-5.5V Module KY-012

Reference:

DET562

€2.50

KY-012 Active Buzzer Module (3.5–5.5V) — plug-and-play piezoelectric buzzer with built-in oscillator. Drive HIGH from any Arduino digital pin to produce an instant fixed tone. No PWM or tone() function required.

In Stock

Components

Passive buzzer Sensor Module KY-006

Reference:

DET556

€2.50

KY-006 Passive Buzzer Sensor Module — a compact 3-pin Arduino-compatible module that generates tones and melodies via PWM signal. Unlike active buzzers, the KY-006 requires an external frequency signal to produce sound, giving you full control over pitch and duration.

View

Out of Stock

Components

Three Color LED (RGB) Module KY-016

Reference:

DET566

€1.75

KY-016 RGB LED Module for Arduino – full-color three-pin PWM control with built-in current-limiting resistors. Common cathode, 5V operating voltage, plug-in LED for easy mixing of red, green and blue.

In Stock

Motors

Micro SERVO motor 180 degree SG90

Reference:

MOT460

€4.50

The SG90 micro servo motor is a 9g PWM-controlled servo offering 180° rotation, ideal for Arduino robotics, RC models, and maker projects requiring precise angular positioning.

In Stock

Motors

Micro SERVO motor 180 degree MG90S

Reference:

MOT462

€5.50

The MG90S is a metal gear micro servo motor with 180° rotation, PWM control, and dual ball bearings. Weighing just 13.6g, it delivers up to 2.2 kg·cm torque at 6V — ideal for RC models, robotics, and Arduino projects.

In Stock

Motors

Micro SERVO motor 360 degree FS90R

Reference:

MOT465

€10.90

The FS90R is a continuous rotation micro servo motor by FEETECH, offering 360° open-loop speed and direction control via PWM signal. Compact (9 g) and compatible with Arduino, Raspberry Pi, and any 5V PWM output. Ideal for robotics, wheeled robots, and automation projects.

In Stock

Motors

Servo Controller Board - Tester

Reference:

MOT446

€5.50

DR0277 CCPM Servo Tester & Controller Board — test and calibrate servo motors or ESCs without a microcontroller. Supports manual, automatic, and center/median modes. Input: DC 4.2–6.0V, PWM output: 1.5ms ±0.5ms.

In Stock

Prototyping Boards (Breadboards)

3.3V/5V Breadboard Power Supply Module

Reference:

BRE900

€3.95

3.3V/5V Breadboard Power Supply Module for MB102 breadboards. Input DC 6.5–12V, selectable output 3.3V or 5V at up to 700mA. Compact, plug-in design ideal for Arduino and ESP32 prototyping projects.

In Stock

Components

Two Color LED Module (Red and Green) KY-029

Reference:

DET579

€2.00

KY-029 Dual Color LED Module (Red & Green) — 3mm common-cathode diffused LED for Arduino and compatible boards. PWM-controllable for variable color output. Compact, low-cost visual indicator for any maker project.

In Stock

Components

Button Key Switch Sensor Module KY-004

Reference:

DET554

€2.25

The KY-004 Button Key Switch Sensor Module is a compact digital input module for Arduino, ESP32, and Raspberry Pi projects. It features a momentary push-button that outputs a digital HIGH/LOW signal on a simple 3-pin 2.54 mm header, operating at 3.3 V–5 V.

Last items in stock

Components

5V Laser Head Sensor Module KY-008

Reference:

DET558

€1.75

KY-008 5V Laser Head Sensor Module — 650 nm red laser transmitter on a compact 15×24 mm PCB. Plug-and-play with Arduino via 3-pin header, ideal for line-of-sight sensing and DIY projects.

In Stock

Components

Mercury Switch Module KY-017

Reference:

DET567

€2.75

KY-017 Mercury Tilt Switch Module — 3-pin digital output sensor (3.3V–5.5V) compatible with Arduino, ESP32 and Raspberry Pi. Detects tilt and orientation changes using a sealed mercury capsule. Part of the popular 37-in-1 sensor kit.

In Stock

Components

Standard Tilt Switch Module KY-020

Reference:

DET570

€2.25

KY-020 Standard Tilt Switch Module with digital output interface. Detects tilt or inclination and outputs a digital signal — ideal for Arduino projects requiring orientation sensing or tilt-activated alerts.

In Stock

Components

Mini Reed Magnetic Switch Module KY-021

Reference:

DET571

€1.95

KY-021 Mini Reed Magnetic Switch Module — digital NO reed switch, 3.3V–5V, 3-pin interface. Compatible with Arduino, ESP32, Raspberry Pi. Ideal for detecting magnetic fields in door/window sensors, security systems, and automation projects.

In Stock

Components

7 Color Flashing LED Module KY-034

Reference:

DET584

€2.00

KY-034 7 Color Flashing LED Module features an automatic 5mm round high-brightness LED (model YB-3120B4PnYG-PM) with a white mist lens. It cycles through multiple colors autonomously — no microcontroller code required for the flashing effect. Forward voltage: 3.0–4.5V.

In Stock

Components

Rotary Encoder Module KY-040

Reference:

DET590

€2.50

KY-040 Rotary Encoder Module for Arduino — 5V incremental rotary encoder with push-button, 20 pulses per revolution, bidirectional counting, unlimited rotation range. Ideal for menus, volume controls, and position tracking.

In Stock

Prototyping Boards (Breadboards)

Breadboard Jumper Wire Male to Male 40 PINS

Reference:

BRE.551

€3.95

These high quality jumper cables are useful for creating cirtuits between your microcontroller and the breadboard

View

In Stock

Prototyping Boards (Breadboards)

Breadboard Jumper Wire Male to Female 40 PINS

Reference:

BRE.561

€4.95

These high quality jumper cables are useful for creating cirtuits between your microcontroller and the breadboard

View

In Stock

Prototyping Boards (Breadboards)

Breadboard Jumper Wire Female to Female 40 PINS

Reference:

BRE.571

€3.45

These high quality jumper cables are useful for creating cirtuits between your microcontroller and the breadboard

View

Last items in stock

Motors

Stepper Motor 5V

Reference:

MOT410

€4.50

The 28BYJ-48 is a compact 5V unipolar stepper motor with a built-in 1/64 reduction gear set, delivering 512 effective steps per revolution. Ideal for makers, students, and hobbyists experimenting with motion control in small-scale projects.

View

Out of Stock

Buzzers

Buzzer 5V

Reference:

BUZ024

€0.90

5V electromagnetic buzzer with built-in generator, continuous 2.3 kHz tone, 85 dB output. Works from 3–7 V, mounts directly on PCB or breadboard. Ideal for Arduino and educational projects.

View

Out of Stock

Motors

Stepper Motor 12V

Reference:

MOT420

€4.50

The 28BYJ-48 Stepper Motor 12V is a compact unipolar stepper motor ideal for small projects, robotics, and experimenting with motion control. With a built-in gear reduction and mounting plate, it is a perfect entry-level stepper for makers and students.

In Stock

LED

Infrared Led 5mm - 940nm (100mW)

Reference:

INR210

€0.75

Infrared LED 5mm 950nm (MPN: 9349) — through-hole IR LED with 1.5V forward voltage, 50mA max current and 5000mcd brightness. Ideal for remote control, proximity sensing and IR communication projects with Arduino and Raspberry Pi.

In Stock

Buzzers

Piezoelectric Buzzer 12v Transducer

Reference:

BUZ043

€2.00

HPE-127 Piezoelectric Buzzer 12V Transducer (externally driven) by OEM. Wide voltage range 3–30V p-p, 4.0kHz tone, 85dB output at 20cm. Compact 30mm disc with 150mm wire leads.

In Stock

Prototyping Boards (Breadboards)

Breadboard - Half Size 400 Tie Point

Reference:

BRE120

€3.95

GRB-EB02-400-WH Half Size Solderless Breadboard with 400 tie points and 0.1" (2.54mm) pitch. Perfect for quickly prototyping circuits with Arduino, ESP32, and Raspberry Pi — no soldering required.

View

Out of Stock

Connectors

USB 2.0 Type A Female Breakout Board

Reference:

PCB501

€0.65

USB 2.0 Type A Female Breakout Board (PCB501) — breaks out VBUS, GND, D− and D+ to a 2.54 mm (0.1") pitch header. Compact 16×13 mm PCB with 3 mm mounting holes, ideal for breadboard and prototype use.

In Stock

Components

5V Laser Receiver Sensor Detection Module

Reference:

DET5585

€2.25

GR2173X5 5V Laser Receiver Sensor Detection Module – non-modulated laser detector on a compact 1.5×1.9 cm PCB. Outputs HIGH when laser is detected, LOW when not. Ideal for Arduino projects in controlled light environments.

In Stock

Diodes

5V Laser Head Diode 6mm Point

Reference:

OPT450

€1.25

Red 650nm laser dot diode head, 5mW output, 3–3.5V operating voltage, Ø6×13.5mm cylindrical form factor with 70–80mm lead wires. Ideal for Arduino and ESP32 projects requiring a compact point laser source.

In Stock

Motors

SERVO motor 180 degree 12kg S3003

Kuongshun

Reference:

MOT475

€9.95

S3003 Servo Motor 180° 12kg by Kuongshun — standard analog servo with PWM control, 4.8–6V operation, and up to 11kg/cm stall torque. Ideal for robotics, RC vehicles, and Arduino-based projects.

View

Out of Stock

Motors

SERVO motor 6kg.cm Continuous Rotation

Kuongshun

Reference:

MOT480

€17.50

FS5106R Continuous Rotation Servo Motor by Kuongshun — 6kg.cm torque at 6V, 360° full rotation, analog control, standard 25T (Futaba/Feetech) spline. Compatible with Arduino, ESP32 and any servo library. Ideal for simple wheeled robots and motorized projects.

In Stock

Switches

Set of 25 Tactile Push Button Switches 12x12mm 7.3mm 4pins

Kuongshun

Reference:

SWTA150

€4.95

AE090 Kuongshun Set of 25 Tactile Push Button Switches 12x12mm 7.3mm height, 4-pin through-hole, normally-open momentary action. Includes 25 color-coded caps (5 colors × 5 pcs) in a re-sealable storage case — ideal for Arduino, breadboard, and PCB projects.

View

Out of Stock

Breadboard - Mini Size 170 Tie Point White

Prototyping Boards (Breadboards)

Breadboard - Mini Size 170 Tie Point White

Reference:

BRE201

€1.95

Mini Breadboard with 170 tie points – perfect for prototyping small circuits, DIP ICs, and jumper wire breakouts without soldering. Compact 47×36.5mm size with peel-and-stick adhesive backing.

View

Out of Stock

Breadboard - Mini Size 170 Tie Point Green

Prototyping Boards (Breadboards)

Breadboard - Mini Size 170 Tie Point Green

Reference:

BRE202

€1.95

Mini Breadboard with 170 tie points in green — perfect for solderless prototyping of small circuits, DIP ICs, and jumper wire breakouts. Includes peel-and-stick adhesive backing. Dimensions: 47 × 36.5 × 10 mm.

In Stock

Prototyping Boards (Breadboards)

Alligator Clip to Male Jumper Wire 10 PINS

Reference:

BRE.590

€5.45

These high quality jumper cables are useful for creating cirtuits between your microcontroller and the breadboard

View

In Stock

Prototyping Boards (Breadboards)

Alligator Clip to Female Jumper Wire 10 PINS

Reference:

BRE.595

€4.95

These high quality jumper cables are useful for creating cirtuits between your microcontroller and the breadboard

View

In Stock

Connectors

USB 2.0 Type A Male Breakout Board

OEM

Reference:

PCB500

€0.65

USB 2.0 Type A Male Breakout Board (PCB500) — mounts a standard USB Type A male connector onto a compact PCB with 2.54 mm (0.1") pitch solder pads for easy wiring, breadboarding or PCB integration. Exposes VCC, GND, D+, D− and ID pins. Board dimensions: 16 × 13 mm with 3 mm mounting holes.

View

Out of Stock

Battery Holders

Battery snap with DC Jack 5.5x2.1mm

OEM

Reference:

BAH0025

€0.95

Battery snap with DC Jack 5.5×2.1mm and 15 cm red-black wire — the quickest way to power any DC-jack device directly from a 9V PP3 battery or battery holder with snap connector.

In Stock

Motors

SERVO motor 180 degree 12kg MG995

Kuongshun

Reference:

MOT476

€12.50

MG995 Servo Motor 12kg by Kuongshun — a high-torque 180° standard servo controlled via PWM signal. Operating voltage 4.8V–6.6V, torque up to 11kg/cm at 6V. Includes mounting accessories for easy integration with Arduino, ESP32 and robotics projects.

Last items in stock

Breadboard – Full-Size MB-102 Transparent

Prototyping Boards (Breadboards)

Breadboard – Full-Size MB-102 Transparent

Reference:

BRE172

€6.95

MB-102 Full-Size Transparent Breadboard with 830 tie points for solderless prototyping. Compatible with 20-29 AWG wire and featuring spring-clip contacts rated for 5,000+ insertions. Size: 16.5 × 5.4 × 0.9 cm.

View

Out of Stock

Prototyping Boards (Breadboards)

Breadboard 2390 Points Soldless

Reference:

BRE195

€19.95

ZY-206 Breadboard with 2390 tie-points and black aluminium base plate — the ideal solderless prototyping platform for Arduino, ESP32 and Raspberry Pi projects. Features 3 terminal strips, 5 distribution strips and 4 binding posts for maximum versatility.

In Stock

Motors

Micro SERVO motor SG90 Continuous Rotation 360°

Reference:

MOT4601

€7.50

SG90-360 Micro Servo Motor with 360° continuous rotation. Weighing just 9g, it is ideal for robotics, wheeled platforms, and any project requiring unlimited rotation. Fully compatible with Arduino and most microcontrollers.

View

Out of Stock

Standard Servo Motor - High Torque, Analog SG5010

Motors

Standard Servo Motor - High Torque, Analog SG5010

Reference:

MOT490

€8.50

SG5010 Standard Servo Motor – high-torque analog servo with metal gears, 180° rotation, ~39g, compatible with Arduino, Raspberry Pi and PIC microcontrollers. Ideal for RC models, robotic arms and educational projects.

In Stock

ZY-204 Solderless Breadboard 1660 holes with black aluminum backplate.

ZY-204 Solderless Breadboard 1660 holes with black aluminum backplate. 2

Prototyping Boards (Breadboards)

Breadboard 1660 Points - Solderless Prototyping Board

Reference:

BRE185

€11.90

ZY-204 Breadboard 1660 Points with aluminum base — the go-to solderless prototyping board for makers, students, and engineers who need space, stability, and clean power management in one robust package.

Last items in stock

Monday	09:00 - 18:30
Tuesday	09:00 - 18:30
Wednesday	09:00 - 14:30
Thursday	09:00 - 18:30
Friday	09:00 - 18:30
Saturday	09:30 - 13:30