Arduino

Showing 101-150 of 201 item(s)

Sensors

Alcohol Sensor Module MQ-3

Reference:

DET653

MQ-3 Alcohol Sensor Module – detects ethanol and alcohol vapors in the range of 10–1000 PPM with analog and digital output. Compatible with Arduino and 5V microcontroller platforms. Fast response, adjustable sensitivity.

In Stock

Motors

Micro SERVO motor 180 degree SG90

Reference:

MOT460

€4.50

The SG90 micro servo motor is a 9g PWM-controlled servo offering 180° rotation, ideal for Arduino robotics, RC models, and maker projects requiring precise angular positioning.

In Stock

Components

Mini Reed Magnetic Switch Module KY-021

Reference:

DET571

€1.95

KY-021 Mini Reed Magnetic Switch Module — digital NO reed switch, 3.3V–5V, 3-pin interface. Compatible with Arduino, ESP32, Raspberry Pi. Ideal for detecting magnetic fields in door/window sensors, security systems, and automation projects.

In Stock

Components

Active Buzzer 3.5-5.5V Module KY-012

Reference:

DET562

€2.50

KY-012 Active Buzzer Module (3.5–5.5V) — plug-and-play piezoelectric buzzer with built-in oscillator. Drive HIGH from any Arduino digital pin to produce an instant fixed tone. No PWM or tone() function required.

In Stock

LCD Display Module 16x2 Digits with IIC/I2C/TWI/SPI Interface - Blue

Arduino Modules

LCD Display Module 16x2 Digits with IIC/I2C/TWI/SPI Interface - Blue

Reference:

LCD051

€5.95

LCD1602 16x2 character LCD display module with I2C/IIC/TWI/SPI interface and blue backlight. Runs on 5V DC, built-in HD44780-equivalent controller, compact 80×36×12mm form factor — ideal for Arduino projects.

View

Out of Stock

Sensors

Analog Temperature Sensor Module KY-013

Reference:

DET563

€2.75

KY-013 Analog Temperature Sensor Module uses a thermistor to detect real-time ambient temperature changes and output analog voltage to any microcontroller ADC pin. Simple 3-pin interface, ideal for Arduino projects.

In Stock

Digital Temperature And Relative Humidity Sensor Module DHT-11 KY-013

Digital Temperature And Relative Humidity Sensor Module DHT-11 KY-013 2

Sensors

Digital Temperature And Relative Humidity Sensor Module DHT-11 KY-015

Reference:

DET565

€3.00

KY-015 DHT-11 Digital Temperature & Humidity Sensor Module — 3-pin single-bus output, 3.3–5.5V supply, measures 0–50°C and 20–90%RH. Ready to use with Arduino, ESP32, and Raspberry Pi projects.

View

Out of Stock

Components

Three Color LED (RGB) Module KY-016

Reference:

DET566

€1.75

KY-016 RGB LED Module for Arduino – full-color three-pin PWM control with built-in current-limiting resistors. Common cathode, 5V operating voltage, plug-in LED for easy mixing of red, green and blue.

In Stock

Components

Mercury Switch Module KY-017

Reference:

DET567

€2.75

KY-017 Mercury Tilt Switch Module — 3-pin digital output sensor (3.3V–5.5V) compatible with Arduino, ESP32 and Raspberry Pi. Detects tilt and orientation changes using a sealed mercury capsule. Part of the popular 37-in-1 sensor kit.

In Stock

Sensors

Photosensitive Resistor Sensor Module KY-018

Reference:

DET568

€2.00

KY-018 Photosensitive Resistor Sensor Module – an analog light sensor for Arduino and compatible boards. Detects ambient light intensity and outputs a varying analog voltage. Ideal for automatic lighting, alarm systems, and light-controlled projects.

In Stock

Relay

1 Channel 5V Relay Module KY-019

Reference:

DET569

€1.95

KY-019 1-Channel 5V Relay Module lets your Arduino switch AC 250V/10A or DC 30V/10A loads with just a 5mA trigger signal. Perfect for controlling home appliances, lights, and motors from a microcontroller.

In Stock

Components

Standard Tilt Switch Module KY-020

Reference:

DET570

€2.25

KY-020 Standard Tilt Switch Module with digital output interface. Detects tilt or inclination and outputs a digital signal — ideal for Arduino projects requiring orientation sensing or tilt-activated alerts.

In Stock

Modules

VGA Camera 300KP Module - OV7670

Reference:

DET530

€5.50

OV7670 VGA Camera 300KP Module — single-chip image sensor with SCCB interface, 8-bit data output, and up to 30 fps at VGA resolution. Compact and low-voltage design ideal for Arduino and embedded vision projects.

In Stock

Sensors

Photo Interrupter Module KY-010

Reference:

DET560

€2.00

KY-010 Photo Interrupter Module with digital output and built-in LED indicator. Detects beam interruptions and outputs a digital signal — ideal for Arduino projects requiring object detection or counting.

In Stock

Prototyping Boards (Breadboards)

Breadboard – Full-Size MB-102

Reference:

BRE170

€5.95

MB-102 Full-Size Breadboard – 830 tie-points, solderless prototyping platform measuring 164 × 54 × 11 mm. Compatible with Arduino, ESP32, and Raspberry Pi projects. Ideal for building and testing circuits without soldering.

View

Out of Stock

Keypads

Infrared Remote Control Module

Reference:

SWK800

€4.00

HX1838 Infrared Remote Control Receiver Module — 3.3V/5V compatible IR sensor with 38kHz carrier frequency reception, 10K pull-up on signal pin, and range up to 8 meters. Ideal for Arduino, ESP32, and Raspberry Pi projects.

In Stock

Keypads

Dual-axis XY Joystick Module KY-023

Reference:

DET573

€2.75

KY-023 Dual-Axis XY Joystick Module — PS2-style analog joystick with two 10 kΩ potentiometers (X/Y axes) and a built-in push-button switch. Works with Arduino, ESP32, and Raspberry Pi. Plug-and-play, no libraries needed.

View

Out of Stock

Sensors

Linear Magnetic Hall Sensor KY-024

Reference:

DET574

€2.25

The KY-024 Linear Magnetic Hall Sensor is a compact Arduino-compatible module that detects the presence and strength of magnetic fields, providing both analog and digital output signals for your projects.

In Stock

Modules

Magnetic Reed Switch Module KY-025

Reference:

DET575

€2.50

KY-025 Magnetic Reed Switch Module with LM393 comparator, digital output (0/1), operating voltage 3.3V–5V. Compatible with Arduino, ESP32, and Raspberry Pi projects. Ideal for detecting magnetic fields in door/window sensors, relays, and automation systems.

In Stock

Motors

DC Motor Speed Controller Module 4.5-35v

Reference:

MOT095

€7.50

DC Motor Speed Controller Module operating on 4.5–35V DC with PWM control (20 kHz, 1–100% duty cycle), up to 5A / 90W output. Compact 30×26×14mm module with potentiometer knob for smooth, stepless speed adjustment — ideal for makers and engineers.

In Stock

Prototyping Boards (Breadboards)

3.3V/5V Breadboard Power Supply Module

Reference:

BRE900

€3.95

3.3V/5V Breadboard Power Supply Module for MB102 breadboards. Input DC 6.5–12V, selectable output 3.3V or 5V at up to 700mA. Compact, plug-in design ideal for Arduino and ESP32 prototyping projects.

In Stock

Relay

5V Relay Module - 4 Channel

Reference:

REL720

€6.50

5V 4-Channel Relay Module – SPDT contacts rated AC250V/10A & DC30V/10A, 50–60mA driver current per channel. Control high-current appliances directly from any 5V MCU such as Arduino.

Last items in stock

Infrared Sensor TCRT5000 with Analog & Digital Output

Sensors

Infrared Sensor TCRT5000 with Analog & Digital Output

Reference:

DET510

€2.95

The TCRT5000 infrared reflective sensor module provides both analog and digital output for reliable proximity and line detection. Features an onboard LM393 comparator and adjustable sensitivity potentiometer. Compatible with Arduino, ESP32, and Raspberry Pi projects.

In Stock

Sensors

Reflective photoelectric switch tracking module KY-033

Reference:

DET583

€2.50

KY-033 Reflective Photoelectric Switch Tracking Module – IR line-following sensor with 2.5V–12V operating range, optimized for 5V systems. Ideal for Arduino robots and line-tracking projects.

In Stock

Components

Two Color LED (Red & Green) Module KY-011

Reference:

DET561

€2.00

KY-011 Two-Color LED Module (Red & Green) — a common-cathode bi-color LED module with 5 mm diffused LED, 150° viewing angle, and 3-pin header for direct use with Arduino. Forward voltage 2.0–2.5 V, wavelengths 571 nm (green) & 644 nm (red).

In Stock

Arduino UNO Rev3 — Genuine Arduino board with ATmega328P microcontroller, 14 digital I/O pins and 6 analog inputs

Arduino Official Boards (Genuine)

Arduino UNO Rev3

Arduino

Reference:

ARD010

€35.90

The Arduino UNO Rev3 is the world's most iconic microcontroller board — the starting point for millions of students, educators, and makers worldwide. Built around the ATmega328P with 14 digital and 6 analog I/O pins, the UNO Rev3 is everything you need to learn electronics, build your first project, or teach programming in the classroom. 🎓 The #1 board...

Available on request

Sensors

Red Plate Flame Sensor Module KY-026

Reference:

DET576

€2.50

The KY-026 Red Plate Flame Sensor Module detects open flames by sensing infrared light in the 760–1100 nm range. Features both analog (AO) and digital (DO) outputs, an adjustable sensitivity potentiometer, and a 60° detection angle. Ideal for fire alarm and safety systems with Arduino or compatible boards.

In Stock

Prototyping Boards (Breadboards)

Jumper Wires M/M Starter Kit 65pcs

Reference:

BRE525

€4.95

65-piece male-to-male jumper wire kit for breadboard prototyping. Assorted lengths (110mm–240mm) and colours, 2.54mm pitch. Compatible with Arduino, Raspberry Pi, ESP32 and all standard breadboards.

In Stock

Motors

Micro SERVO motor 180 degree MG90S

Reference:

MOT462

€5.50

The MG90S is a metal gear micro servo motor with 180° rotation, PWM control, and dual ball bearings. Weighing just 13.6g, it delivers up to 2.2 kg·cm torque at 6V — ideal for RC models, robotics, and Arduino projects.

In Stock

Keypads

Membrane 1×4 Matrix Keypad

Reference:

SWK205

€2.00

Membrane 1×4 Matrix Keypad with FPC circuit — 4 independent keys, adhesive backing, compatible with Arduino, ESP32, Raspberry Pi. Pad size: 68×20mm, total length: 107mm.

In Stock

Keypads

Membrane 3x4 Matrix Keypad

Reference:

SWK220

€2.50

Membrane 3x4 Matrix Keypad with 12 keys arranged in a telephone-style grid. Passive matrix interface requiring only 7 GPIO pins (4 rows + 3 columns). Features self-adhesive backing, Dupont 2.54mm connector, and 1 million cycle life expectancy. Compatible with Arduino, ESP32, and most microcontrollers.

In Stock

Keypads

Membrane 4x4 Matrix Keypad

Reference:

SWK230

€2.75

Membrane 4x4 Matrix Keypad with 16 keys (0–9, A–D, *, #) arranged in a 4-row × 4-column grid. Interfaces with any microcontroller using just 8 GPIO pins. Features adhesive backing for easy mounting and ultra-thin profile.

View

Out of Stock

Keypads

Membrane 4x5 Matrix Keypad

Reference:

SWK250

€3.00

Membrane 4x5 Matrix Keypad with 20 keys arranged in a 4-column × 5-row grid. Ultra-slim design with adhesive backing, 9-pin output, and 3.3V–5V operating voltage — ideal for Arduino, ESP32, and breadboard prototyping.

In Stock

Ultrasonic Wave Detector Ranging Module HC-SR04

Sensors

Ultrasonic Wave Detector Ranging Module HC-SR04

Reference:

DET500

€2.95

The HC-SR04 is a 5V ultrasonic distance sensor module that measures distances from 2cm to 450cm with up to 0.3cm precision. It uses a simple 4-pin GPIO interface (VCC, TRIG, ECHO, GND) and is fully compatible with Arduino UNO, Nano, and Mega boards.

View

Out of Stock

Sensors

Bracket for Ultrasonic Wave Detector Ranging Module HC-SR04 - Acrylic

Reference:

DET501

€1.50

Acrylic mounting bracket for the HC-SR04 ultrasonic distance sensor module. Provides a stable, ready-to-mount holder for secure positioning in robotics, obstacle avoidance, and distance measurement projects.

In Stock

Motors

Micro SERVO motor 360 degree FS90R

Reference:

MOT465

€10.90

The FS90R is a continuous rotation micro servo motor by FEETECH, offering 360° open-loop speed and direction control via PWM signal. Compact (9 g) and compatible with Arduino, Raspberry Pi, and any 5V PWM output. Ideal for robotics, wheeled robots, and automation projects.

In Stock

Motors

Servo Controller Board - Tester

Reference:

MOT446

€5.50

DR0277 CCPM Servo Tester & Controller Board — test and calibrate servo motors or ESCs without a microcontroller. Supports manual, automatic, and center/median modes. Input: DC 4.2–6.0V, PWM output: 1.5ms ±0.5ms.

In Stock

Sensors

Temperature Measurement Sensor Module KY-001

Reference:

DET551

€2.75

KY-001 DS18B20 digital temperature sensor module with 1-Wire interface. Measures -55°C to +125°C with ±0.5°C accuracy. Compatible with Arduino, ESP32, Raspberry Pi and 3.0–5.5V boards.

In Stock

Rain/Raindrops Detection Sensor - Weather Humidity Module

Sensors

Rain/Raindrops Detection Sensor - Weather Humidity Module

Reference:

DET525

€3.25

FR-04 Rain & Raindrop Detection Sensor Module with LM393 comparator, dual analog/digital output, and 3.3V–5V operating voltage. Compatible with Arduino, ESP32, and Raspberry Pi projects.

In Stock

Sensors

Shock Vibration Switch Sensor Module KY-002

Reference:

DET552

€2.50

KY-002 Shock Vibration Switch Sensor Module with omnidirectional SW-18015P spring mechanism. Digital output, 3.3V–5V operating voltage. Compatible with Arduino, ESP32 and other microcontrollers.

In Stock

Sensors

Hall Magnetic Sensor Module KY-003

Reference:

DET553

€1.95

KY-003 Hall Magnetic Sensor Module — detects magnetic fields using the 3144 Hall-effect IC and outputs a clean digital signal. Ideal for Arduino projects requiring contactless position or proximity sensing.

In Stock

Components

Button Key Switch Sensor Module KY-004

Reference:

DET554

€2.25

The KY-004 Button Key Switch Sensor Module is a compact digital input module for Arduino, ESP32, and Raspberry Pi projects. It features a momentary push-button that outputs a digital HIGH/LOW signal on a simple 3-pin 2.54 mm header, operating at 3.3 V–5 V.

Last items in stock

Sensors

Infrared Εmission Sensor Module KY-005

Reference:

DET555

€2.50

KY-005 Infrared (IR) Transmitter Module — 940 nm IR LED, 3.3 V–5 V operation, digital control via PWM. Compatible with Arduino, ESP32 and Raspberry Pi for remote control and IR communication projects.

In Stock

Components

Passive buzzer Sensor Module KY-006

Reference:

DET556

€2.50

KY-006 Passive Buzzer Sensor Module — a compact 3-pin Arduino-compatible module that generates tones and melodies via PWM signal. Unlike active buzzers, the KY-006 requires an external frequency signal to produce sound, giving you full control over pitch and duration.

View

Out of Stock

Components

5V Laser Head Sensor Module KY-008

Reference:

DET558

€1.75

KY-008 5V Laser Head Sensor Module — 650 nm red laser transmitter on a compact 15×24 mm PCB. Plug-and-play with Arduino via 3-pin header, ideal for line-of-sight sensing and DIY projects.

In Stock

Components

SMD Led 3 Colors RGB Module KY-009

Reference:

DET559

€2.50

KY-009 SMD RGB LED Module features a 5050 PWM RGB SMD LED with built-in current-limiting resistors for safe, full-color light mixing. Compatible with Arduino, Raspberry Pi, and other MCUs. Compact 19×14×5 mm form factor.

In Stock

Δέκτης υπερύθρων (Infrared Receiver) KY-022

Sensors

Infrared IR Sensor Receiver Module KY-022

Reference:

DET572

€2.25

KY-022 Infrared IR Receiver Module — 37.9 KHz carrier frequency, 18 m receiving range, 2.7–5.5 V wide supply voltage. Compatible with Arduino, ESP32 and Raspberry Pi projects. Plug-and-play 3-pin interface based on the 1838 IR receiver IC.

Last items in stock

Sensors

Mini Infrared PIR Motion Sensor Module HC-SR505

Reference:

DET505

€3.25

HC-SR505 Mini Infrared PIR Motion Sensor Module — ultra-compact (10×23 mm), 3 m detection range, 4.5–20 V supply, 3.3 V output. Ideal for battery-powered automatic control and motion-activated projects.

View

Out of Stock

Modules

Bluetooth Transceiver RF MasterModule for Arduino - HC-06

Reference:

DET520

€8.95

HC-06 Bluetooth Serial Module (MPN: HC-06) — a compact TTL wireless serial port replacement supporting 3.6–5.5V input, default 9600 baud, with built-in antenna and up to 30ft range. Ideal for Arduino, MCU, and embedded projects.

View

Out of Stock

Real Time Clock (RTC) Memory Module DS3231

Modules

Real Time Clock (RTC) Memory Module DS3231

Reference:

DET535

€4.25

DS3231 Real Time Clock (RTC) Memory Module — ultra-accurate I2C RTC with integrated temperature-compensated crystal oscillator (TCXO), battery backup, and full date/time tracking. Ideal for Arduino, ESP32, and Raspberry Pi projects.

View

Out of Stock

Monday	09:00 - 18:30
Tuesday	09:00 - 18:30
Wednesday	09:00 - 14:30
Thursday	09:00 - 18:30
Friday	09:00 - 18:30
Saturday	09:30 - 13:30