Arduino Modules

Showing 51-91 of 91 item(s)

Sensors

Electret Microphone Breakout SparkFun

SparkFun

Reference:

DET701

€11.95

BOB-12758 SparkFun Electret Microphone Breakout — compact sound sensor with 60x preamplifier, 100Hz–10kHz frequency range, and 2.7V–5.5V supply. Ready to connect to any microcontroller's analog input for voice, clap, or knock detection.

Upon Request

Sensors

High Accuracy I2C Temperature Sensor Breakout Board - Adafruit

Adafruit

Reference:

DET750

€9.90

MCP9808 High Accuracy I2C Temperature Sensor Breakout Board by Adafruit. Typical accuracy ±0.25°C, precision 0.0625°C, range -40°C to +125°C, works with 2.7V–5.5V logic and any standard I2C microcontroller.

Upon Request

Sensors

I2C or SPI Barometric Pressure & Altitude Sensor - Adafruit

Adafruit

Reference:

DET755

€17.90

BMP280 by Adafruit — I2C & SPI barometric pressure, altitude, and temperature sensor with ±1 hPa and ±1.0°C accuracy. Ideal for weather stations, drones, and IoT projects with Arduino or ESP32.

Upon Request

Sensors

I2C or SPI Barometric Pressure Sensor Module

Reference:

DET513

€3.50

BMP280 I2C/SPI Barometric Pressure Sensor Module — compact, low-power absolute pressure sensor by Bosch. Supports both I2C and SPI interfaces, ideal for Arduino, ESP32, and Raspberry Pi projects requiring accurate altitude or weather data.

In Stock

Modules

Bluetooth Module for Arduino - HM10

Reference:

DET523

€10.95

HM-10 Bluetooth 4.0 BLE module based on the Texas Instruments CC2541 chipset. Features on-board voltage regulation, 5V TTL compatibility, and UART/AT-Command interface. Ideal for Arduino and microcontroller wireless projects targeting Android and iOS devices.

View

Out of Stock

RFID Controller Breakout Board MF RC-522- 13.56MHz

Sensors

RFID Controller Breakout Board MF RC-522- 13.56MHz

OEM

Reference:

DET625

€5.95

RC522 RFID Controller Breakout Board operating at 13.56MHz with SPI interface. Supports read/write to MIFARE tags and cards. Compatible with Arduino, AVR, ARM, PIC and other microcontrollers.

In Stock

Sensors

RFID Card 13.56MHz

OEM

Reference:

DET6250

€0.95

RFID Card 13.56MHz — ISO/IEC 14443A compatible, credit-card format (86×54×0.8mm) in PVC, designed to work with RC522 RFID reader modules. Supports a read range of up to 90mm and operates in temperatures from -20°C to 55°C.

In Stock

Sensors

Digital Temperature and Humidity Sensor Module DHT22

Reference:

DET5655

€7.95

DHT22 (AM2302) Digital Temperature & Humidity Sensor Module – calibrated single-wire interface, 3.3V–5.5V supply, 1.5mA operating current. Higher accuracy and wider range than DHT11, compatible with Arduino and ESP32 projects.

In Stock

Digital Temperature and Humidity Sensor DHT22

Sensors

Digital Temperature and Humidity Sensor DHT22

Reference:

DET5656

€7.50

DHT-22 (RHT03) Digital Temperature & Humidity Sensor — single-wire interface, 3.3–6V supply, ±2% RH accuracy. No extra components needed. Works with Arduino, ESP32 and Raspberry Pi projects out of the box.

In Stock

LCD Display Module 16x2 Digits with IIC/I2C/TWI/SPI Interface - Blue

Arduino Modules

LCD Display Module 16x2 Digits with IIC/I2C/TWI/SPI Interface - Blue

Reference:

LCD051

€5.95

LCD1602 16x2 character LCD display module with I2C/IIC/TWI/SPI interface and blue backlight. Runs on 5V DC, built-in HD44780-equivalent controller, compact 80×36×12mm form factor — ideal for Arduino projects.

View

Out of Stock

Sensors

Sound Detection Sensor Module (LM393)

Reference:

DET615

€3.75

LM393 Sound Detection Sensor Module — single-channel digital output, 4–6 V operating voltage, compact 3.1×1.6×0.8 cm board. Ideal for Arduino projects that need to detect sound presence without any extra library.

In Stock

Components

5V Laser Receiver Sensor Detection Module

Reference:

DET5585

€2.25

GR2173X5 5V Laser Receiver Sensor Detection Module – non-modulated laser detector on a compact 1.5×1.9 cm PCB. Outputs HIGH when laser is detected, LOW when not. Ideal for Arduino projects in controlled light environments.

In Stock

Motors

Dual Motor Driver Module L298N

Reference:

MOT088

€5.50

The L298N Dual Motor Driver Module (MPN: L298N) is a high-current H-Bridge controller that gives any microcontroller full speed and direction control over 2 DC motors or 1 bipolar stepper motor. Built around the L298N IC with an onboard heatsink, it bridges the gap between low-power logic and high-power motor loads — ideal for robotics, CNC and automation...

In Stock

Arduino Modules

LCD Display I2C Interface Module

Reference:

LCD120

€2.25

I2C Serial Interface Board Module (MPN: I2C) — converts your standard parallel LCD (16x2, 16x4, 20x4) to I2C, freeing up precious Arduino pins. Connect any compatible LCD display using only 2 wires (SDA & SCL). Address changeable for multi-device buses.

In Stock

Modules

SD Card Module Read and Write

Reference:

DET630

€2.95

SD Card Module with SPI interface, compatible with 5V and 3.3V systems. Features a 2×8 double pin-header (2.54mm) and supports SD/MMC cards for easy data logging and file storage with Arduino, ESP32, and more.

In Stock

Modules

Micro SD Card Module Read and Write

OEM

Reference:

DET631

€2.50

Micro SD Card Module for reading and writing Micro SD and SDHC cards via SPI interface. Supports 5V and 3.3V logic levels with onboard LDO regulator and level conversion circuit. 6-pin interface (GND, VCC, MISO, MOSI, SCK, CS).

In Stock

Sensors

RFID Tag13.56MHz

OEM

Reference:

DET6252

€0.95

RFID Smart Keyfob Tag at 13.56 MHz — compatible with NFC-enabled phones, tablets, and RFID readers/writers. Waterproof ABS housing, 1KB MIFARE-style memory, read range up to 50 mm. Ideal for Arduino and ESP32 access control projects.

In Stock

Sensors

Line Tracking Sensor 5 Channel Module

Reference:

DET511

€5.95

HW-871 Line Tracking Sensor 5 Channel Module with 5× TCRT5000 infrared sensors, onboard comparator, LED indicators and anti-interference design. Supports 3.3V and 5V operation for robot line-following projects with Arduino and compatible boards.

In Stock

Sensors

Microwave Radar Sensor

Reference:

DET508

€2.25

RCWL-0516 Microwave Radar Sensor module — a Doppler-based motion detector that works through walls and non-metallic obstacles, offering a wider detection angle and higher reliability than standard PIR sensors. Ideal for security systems, smart lighting, and presence detection projects.

In Stock

Sensors

Breakout Board for MCP4725 I2C DAC

Reference:

DET735

€5.50

MCP4725 Breakout Board – I2C 12-bit DAC module for outputting true analog voltages from any microcontroller. Ideal for Arduino projects involving audio, waveform generation, and analog control.

In Stock

DC-DC Converter Step-Down 1.25-32V 5A with LED Display - XL4015

DC-DC Converter Step-Down 1.25-32V 5A with LED Display - XL4015 2

Modules

DC-DC Converter Step-Down 4-38V 5A with LED Display - XL4015

Kuongshun

Reference:

DET825

€8.75

XL4015 DC-DC Step-Down Converter by Kuongshun — adjustable 4–38V input, 1.25–36V output, up to 5A with built-in LED voltmeter display. High-efficiency buck module with thermal shutdown, current limit, and short-circuit protection for power projects.

View

Out of Stock

Wireless Transceiver Module with Antenna 2.4GHz nRF24L01

Modules

Wireless Transceiver Module with Antenna 2.4GHz nRF24L01

Reference:

ARD680

€7.90

nRF24L01 2.4GHz Wireless Transceiver Module with external antenna, PA & LNA circuit for extended range up to 800–1000m. Compatible with Arduino, ESP32, Raspberry Pi via SPI.

In Stock

Lithium Battery Charger and Protection Module 1A USB-C - TP4056

Modules

Lithium Battery Charger and Protection Module 1A USB-C - TP4056

Kuongshun

Reference:

PCB540

€1.25

TP4056 USB-C Lithium Battery Charger & Protection Module (1A) by Kuongshun. Charges single-cell Li-Ion/LiPo batteries via CC/CV method with built-in overcharge, over-discharge and short-circuit protection.

In Stock

Triple Axis Gyroscope & Accelerometer IMU - MPU6050

Sensors

Triple Axis Gyroscope & Accelerometer IMU - MPU6050

Kuongshun

Reference:

DET770

€4.95

The MPU-6050 (MPN: MPU-6050, Brand: Kuongshun) is a 6-axis IMU module combining a 3-axis gyroscope and 3-axis accelerometer in a single chip. It communicates via I2C, features a 16-bit ADC per channel, and supports a wide power supply range of 4.3–9V via an on-board LDO regulator.

Upon Request

Arduino Modules

GSM/GPRS Shield for Arduino SIM900

Reference:

ARD660

€21.90

SIM900 GSM/GPRS Shield for Arduino — add cellular SMS, voice calls and GPRS internet connectivity to your Arduino project in minutes. Supports quad-band 850/900/1800/1900 MHz. Just insert a SIM card and you're ready to go.

Last items in stock

Smallest SIM800L GSM/GPRS Module Micro Sim Card

Arduino Modules

Smallest SIM800L GSM/GPRS Module Micro Sim Card

Reference:

ARD663

€8.90

SIM800L GSM/GPRS module with Micro SIM card slot, quad-band global support, and TTL serial interface. Compact 2.5×2.3 cm design, 3.7–4.2 V supply, ideal for IoT SMS and GPRS projects with Arduino or any microcontroller.

Last items in stock

SIM800L V2.0 5V Wireless GSM GPRS MODULE Quad-Band

Arduino Modules

SIM800L V2.0 5V Wireless GSM GPRS MODULE Quad-Band

Reference:

ARD665

€11.90

SIM800L V2.0 is a compact Quad-Band GSM/GPRS module (850/900/1800/1900 MHz) with TTL serial interface, operating at 3.4–4.4 V. Supports SMS, voice, data, and AT commands — ideal for IoT and remote communication projects.

In Stock

5-15W Fast Charging Wireless Charger Module USB-C

Modules

5-15W Fast Charging Wireless Charger Module USB-C

Reference:

PCB591

€8.95

Fast Charging Wireless Charger Module with USB-C input, supporting 5W to 15W output. PCBA board ready for DIY integration into smart devices, custom enclosures, and embedded applications. Features quadruple protection for safe, efficient wireless power transfer.

Last items in stock

Universal Portable 15W Fast Charging Wireless Charger USB-C

Modules

Universal Portable 15W Fast Charging Wireless Charger USB-C

Reference:

PCB592

€7.95

Universal Portable 15W Fast Charging Wireless Charger Module with USB-C input, QI standard compliance, and CE/FCC certification — ideal for DIY builds, custom furniture, and embedded electronics projects.

Last items in stock

FT232RL USB to TTL Serial Converter Module

Modules

FT232RL USB to TTL Serial Converter Module

Reference:

PCB531

€5.95

FT232RL USB to TTL Serial Converter Module – reliable FTDI-based adapter for programming Arduino Pro Mini, ESP8266, ESP32 and other microcontrollers via UART. Plug-and-play USB connection with driver support.

Last items in stock

AT24C256 I2C Interface EEPROM Memory Module (256 Kbit)

Modules

AT24C256 I2C Interface EEPROM Memory Module (256 Kbit)

Reference:

DET641

€4.95

The AT24C256 I2C EEPROM Memory Module offers 256 Kbit (32 KB) of non-volatile storage via a simple 2-wire I2C interface. Address jumpers (A0, A1, A2) allow up to 8 modules on the same bus — ideal for Arduino, ESP32, and Raspberry Pi projects.

In Stock

DC 5V to 3.3V Step-Down Power Supply Module - AMS1117-3.3...

DC 5V to 3.3V Step-Down Power Supply Module - AMS1117-3.3... 2

Modules

DC 5V to 3.3V Step-Down Power Supply Module - AMS1117-3.3 LDO (800mA)

Reference:

DET820

€1.95

AMS1117-3.3 LDO Step-Down Module — converts DC 5V (up to 7V) to a stable 3.3V output at up to 800mA. Compact and reliable, ideal for powering ESP32, ESP8266, and other 3.3V peripherals from a 5V supply.

In Stock

Modules

ACS712 ±30A Hall Current Sensor Module

Reference:

DET810

€3.95

ACS712 ±30A Hall Effect Current Sensor Module — measures DC and AC current up to ±30A with full electrical isolation. Compatible with Arduino, ESP32, and Raspberry Pi via analog output. Ideal for power monitoring and motor control projects.

Last items in stock

Sensors

Water Level Detection Sensor Module

Reference:

DET527

€2.95

Water Level Detection Sensor Module for Arduino and microcontrollers — detects water presence and measures depth via exposed parallel traces acting as a variable resistor. Ideal for rain detection, tank monitoring, and flood alert systems.

In Stock

Modules

433MHz RF Transmitter & Receiver Kit for Arduino

Reference:

ARD685

€2.95

FS1000A 433MHz RF Transmitter & Receiver Kit — operating frequency 433.92 MHz, TX voltage 3V–12V, RX voltage 5V DC. ASK/OOK modulation for simple one-way wireless data transmission with Arduino, ESP32, and Raspberry Pi.

View

Out of Stock

LM2596 Step-Down Buck Module with LED Display

Modules

LM2596 Step-Down Buck Module with LED Display

Reference:

DET823

€7.95

The LM2596 Step-Down Buck Module (MPN: NA068) accepts 4.0V–40V DC input and delivers an adjustable 1.25V–37V DC output. A built-in red LED display shows real-time voltage readings, making it ideal for DIY power supply projects, Arduino, and Raspberry Pi builds.

View

Out of Stock

Blank RFID 125kHz T5577 Rewritable Card for Access Control and Arduino projects.

Blank RFID 125kHz T5577 Rewritable Card for Access Control and Arduino projects. 2

Sensors

RFID 125kHz T5577 Rewritable PVC Card

Reference:

DET6260

€2.95

This Blank RFID Card (PVC Card) operates at the exact frequency of 125kHz and features the T5577 chip. It offers Read/Write capabilities, making it ideal for cloning and writing IDs from standard 125kHz cards (like EM4100/TK4100). It works seamlessly with 125kHz RFID readers (e.g., the RDM6300 module) for Arduino and ESP32 projects. CRITICAL NOTE:...

In Stock

Sensors

Green RFID Keyfob 125kHz TK4100 Read-Only

Reference:

DET6262

€1.50

The green RFID Keyfob (Tag) operates strictly at the 125kHz frequency and features the reliable TK4100 chip (EM4100 compatible). It is a Read-Only device, meaning it comes with a unique, factory-programmed ID number that cannot be altered. Highly durable and completely waterproof, it interfaces seamlessly with 125kHz RFID readers (such as the RDM6300...

In Stock

Sensors

37-in-1 Sensor Modules Kit for Arduino & Raspberry Pi

Kuongshun

Reference:

ARD702

€25.90

The ultimate 37-in-1 Sensor Kit provides everything you need to dive into the world of electronics and IoT. It includes 37 different modules (temperature, motion, sound, relays, etc.) that are fully compatible with Arduino, Raspberry Pi, and ESP32. No soldering is required, as all components come with standard pins for direct breadboard connection. Ideal...

Last items in stock

Modules

Bluetooth 5.0 BLE module RF transceiver Master and Slave HC-42

Reference:

DET522

€14.95

HC-42D Bluetooth 5.0 BLE transceiver module, 2.4GHz ISM band, 1.8–3.6V operating voltage, PCB internal antenna, GFSK modulation, up to 2Mbps air rate. Ideal for low-power wireless projects.

In Stock

Modules

Bluetooth Module RF Transceiver HC-05

Reference:

DET519

€12.95

HC-05 Bluetooth RF Transceiver Module – enables wireless serial (UART) communication between Arduino or other microcontrollers and Bluetooth-enabled devices. Supports Master and Slave modes via Bluetooth 2.0 + EDR protocol.

Last items in stock

Monday	09:00 - 18:30
Tuesday	09:00 - 18:30
Wednesday	09:00 - 14:30
Thursday	09:00 - 18:30
Friday	09:00 - 18:30
Saturday	09:30 - 13:30