Miniature Vibration Motor 3V DC

Miniature Vibration Motor 3V DC

Motors

Reference: MOT002

Part.No: 450-007

€4.00

Out of Stock

Add to cart

Subscribe To When In Stock

You have successfully subscribed to this product

Description
Product Details

Miniature vibration motor measuring only 12mm long x 6mm diameter. Coreless motor design, rated at 3V nominal. Originally designed for silent alert functions in mobile phones and pager, these motors have since found many additional applications within tools, robotics, control sticks and various alert functions in hand held equipment.

Pre-wired with red & black leads 90mm.

Dimensions: L: 12mm. Diameter: 6mm
Rated voltage: 3.0VDC
Operating range: 1.7-3.6VDC
Rated speed: 14000 RPM (±2000 RPM)
Vibration amplitude: 1.5
Starting voltage: 1.7V max.
Rated current: 75mA
Stall current: 140mA max.
Weight: 1.85g

16 other products in the same category:

Servo Controller Board - Tester

Motors

Servo Controller Board - Tester

Reference:

MOT446

DR0277 CCPM Servo Tester & Controller Board — test and calibrate servo motors or ESCs without a microcontroller. Supports manual, automatic, and center/median modes. Input: DC 4.2–6.0V, PWM output: 1.5ms ±0.5ms.

In Stock

Motor 1.5-3V MM12

Motors

Motor 1.5-3V MM12

Reference:

MOT008

In Stock

Stepper Driver Breakout - ULN2003

Stepper Driver Breakout - ULN2003 2

Motors

Stepper Driver Board - ULN2003

Reference:

MOT432

ULN2003 Stepper Motor Driver Board is to use the ULN2003 DARLINGTON ARRAYS to drive the 4-phase 5-wire stepper.

View

Out of Stock

SERVO motor 180 degree 12kg MG995

SERVO motor 180 degree 12kg MG995 2

Motors

SERVO motor 180 degree 12kg MG995

Reference:

MOT476

MG995 Servo Motor 12kg by Kuongshun — a high-torque 180° standard servo controlled via PWM signal. Operating voltage 4.8V–6.6V, torque up to 11kg/cm at 6V. Includes mounting accessories for easy integration with Arduino, ESP32 and robotics projects.

In Stock

Two Channel Motor Driver Board 2.5-12v L9110S

Two Channel Motor Driver Board 2.5-12v L9110S 2

Motors

Two Channel Motor Driver Board L9110S

Reference:

MOT085

The L9110S Dual Motor Driver Board (MPN: L9110S) is an ultra-compact H-Bridge module designed to drive two DC motors or one bipolar stepper motor from any 5V microcontroller such as Arduino or Raspberry Pi. It replaces bulky L298N modules in space-constrained robotics and STEM builds.

Last items in stock

Motor 3-6V MM28

Motors

Motor 3-6V MM28

Reference:

MOT015

In Stock

Micro SERVO motor 180 degree MG90S

Micro SERVO motor 180 degree MG90S 2

Motors

Micro SERVO motor 180 degree MG90S

Reference:

MOT462

The MG90S is a metal gear micro servo motor with 180° rotation, PWM control, and dual ball bearings. Weighing just 13.6g, it delivers up to 2.2 kg·cm torque at 6V — ideal for RC models, robotics, and Arduino projects.

In Stock

DC Motor Speed Controller Module DC 1.8-15V

Motors

DC Motor Speed Controller Module DC 1.8-15V

Reference:

MOT094

MPN 19045 — DC Motor Speed Controller Module for 1.8V–15V DC motors. Controls speed via PWM (0–100% duty cycle), 2A continuous output, 30W max power, compact 32×32×15mm form factor.

In Stock

Micro SERVO motor 360 degree FS90R

Micro SERVO motor 360 degree FS90R 2

Motors

Micro SERVO motor 360 degree FS90R

Reference:

MOT465

The FS90R is a continuous rotation micro servo motor by FEETECH, offering 360° open-loop speed and direction control via PWM signal. Compact (9 g) and compatible with Arduino, Raspberry Pi, and any 5V PWM output. Ideal for robotics, wheeled robots, and automation projects.

In Stock

Stepper Motor 5V

Stepper Motor 5V 2

Motors

Stepper Motor 5V

Reference:

MOT410

The 28BYJ-48 is a compact 5V unipolar stepper motor with a built-in 1/64 reduction gear set, delivering 512 effective steps per revolution. Ideal for makers, students, and hobbyists experimenting with motion control in small-scale projects.

View

Out of Stock

Motor Driver Board L293D Shield Module

Motor Driver Board L293D Shield Module 2

Motors

Motor Driver Board L293D Module

Reference:

MOT087

The L293D Motor Driver Board (MPN: L293D) is a compact Dual H-Bridge module that gives any microcontroller independent speed and direction control over up to 2 DC motors or 1 stepper motor via PWM signals up to 5 KHz.

Last items in stock

Standard Servo Motor - High Torque, Analog SG5010

Standard Servo Motor - High Torque, Analog SG5010 2

Motors

Standard Servo Motor - High Torque, Analog SG5010

Reference:

MOT490

SG5010 Standard Servo Motor – high-torque analog servo with metal gears, 180° rotation, ~39g, compatible with Arduino, Raspberry Pi and PIC microcontrollers. Ideal for RC models, robotic arms and educational projects.

In Stock

Motor Mounting Clip MM18 / MM28

Motors

Motor Mounting Clip MM18 / MM28

Reference:

MOT060

View

Out of Stock

Solar Water Pump 1.5V Magnetic

Motors

Solar Water Pump 1.5V Magnetic

Reference:

MOT052

Last items in stock

Miniature Vibration Motor 3V DC

Motors

Miniature Vibration Motor 3V DC

Reference:

MOT0021

View

Out of Stock

DC Motor Speed Controller Module 4.5-35v

DC Motor Speed Controller Module 4.5-35v 2

Motors

DC Motor Speed Controller Module 4.5-35v

Reference:

MOT095

DC Motor Speed Controller Module operating on 4.5–35V DC with PWM control (20 kHz, 1–100% duty cycle), up to 5A / 90W output. Compact 30×26×14mm module with potentiometer knob for smooth, stepless speed adjustment — ideal for makers and engineers.

In Stock

Product added to wishlist

Product added to compare.