Universal silicone sealant 60ml Transparent - Bison

Universal silicone sealant 60ml Transparent - Bison

Special Adhesives
GLU250
Part.No: 6305451
€7.00
Last items in stock
Immediate Dispatch

TUBE 60 ML TRANSPARENT

 

PROPERTIES

  • (Sea)water resistant
  • Permanently elastic
  • UV and all-weather resistant
  • Mould resistant
  • Excellent bonding on all surfaces
  • Chemical resistant
  • Colourfast
  • Easy to apply
  • Resistant to temperatures between -50°C and +120°C

SUITABLE FOR:

Suitable for sealing joints, seams and cracks in all kinds of applications. Suitable for sealings in sanitary and construction applications, for example in the house, glass construction, display case construction, car, boat and caravan. Also suitable for bonding and sealing clear glass, display cases and display windows. Adheres to almost all materials. Not suitable for bitumen, polyethylene, polypropylene, PTFE and aquariums.

NOT SUITABLE FOR:

Not suitable for polyethylene (PE), polypropylene (PP), PTFE and bitumen.

BEFORE USE:

Working conditions

Only apply at temperatures between +5°C and +40°C.

Surface requirements

The surface should be dry, clean and free of dust and grease. Synthetics should first be roughened and/or pre-treated with BISON Silicone Primer.

Preliminary surface treatment

For a good result, cover the joint’s edges with masking tape. If necessary, prevent three-sided bonding by filling the joint with a foam backer rod or PE film.

Coverage

1 tube for approx. 1.5 m (depending on the diameter of the joint).

DURING USE:

Handling of packaging

Screw the cap from the tube and pierce the tube membrane with the point at the top of the cap in a twisting movement. Screw synthetic nozzle onto the tube and then cut diagonally.

Directions for use

Inject the sealant evenly into the joint and tool within 10 minutes with a putty knife, moistened with a soap solution. Remove the applied masking tape immediately after tooling. After approx. 15 minutes, a surface skin will form.

Points of attention

Silicone hardens under the influence of humidity. Contact with humidity is therefore absolutely necessary during curing. Always consider a joint of at least 6 mm wide. By applying masking tape along the joints completely smooth seams are achieved, remove the tape immediately after smoothing.

AFTER USE:

Stains/residue

Immediately remove stains with white spirit. Cured sealant can only be removed mechanically.

Storage conditions

Store in properly sealed packaging in a dry place at between +5°C and +25°C.

16 other products in the same category:
Tube of completely clear mounting adhesive and sealant Bison Poly Max Crystal Express 125g
Special Adhesives

Bison Poly Max Crystal Express Clear Adhesive 125g

Bison
Reference:
GLU245
€8.95
The Bison Poly Max® Crystal Express 125g is an advanced, 100% clear construction adhesive and sealant based on SMP polymer technology. Formulated to be the ultimate universal solution, it effortlessly bonds, fixes, and seals glass, stone, concrete, metals, mirrors, and synthetics. It achieves a very fast initial grab, with its defining quality being the...
Last items in stock
Product added to wishlist
Product added to compare.