Liquid Rubber 50ml - Bison

Liquid Rubber 50ml - Bison

Special Adhesives
GLU230
Part.No: 6308251/00
€12.75
In Stock
Immediate Dispatch

Flexible, strong repair paste

 

Properties

  • Strong
  • Waterproof
  • Remains flexible
  • Universal
  • Filling
  • Resistant to chemicals
  • Weatherproof
  • Temperature resistant from - 40°C to + 120°C
  • Transparent

What does it do?

Suitable for:

Ideal for glueing, filling and sealing of rubber, leather, textile, neoprene, various synthetics (such as Hypalon®), wood, metal or ceramics. Also suitable for repairing (sports) shoes, (soles and heels), boots, gloves, slippers, (hockey) sticks, inflatable objects (such as boats, air mattresses) made of rubber or soft PVC, rainwear, travel bags, wetsuits, diving gear, tents, (horse) saddles, decorative materials, headlights and to reinforce stitched seams. Also suitable for filling joints and gaps.

Getting started

Before use:

Working conditions

Do not use at temperatures below +5 °C or at an extremely low relative air humidity.

Surface requirements

Materials to be repaired should be dry through and through.

Preliminary surface treatment

All parts should be perfectly clean and free of grease. Always roughen with enclosed sand paper.

Tools

Sand paper and spatula (enclosed for free).

During use:

Directions for use

Use spatula to apply paste in an even layer of at least 2 mm well around area to be repaired (preferably on entire surface). Smoothen paste with spatula. Repairing shoe soles and rubber boats: materials should be perfectly clean and dry through and through. Always sandpaper well. Apply a thin layer of paste (less than 1 mm). Press the enclosed polyester gauze (min. width of 2,5 cm) into paste using enclosed spatula. Apply a thin layer of paste on and around gauze. Smoothen with spatula and a little washing-up liquid. Let cure for at least 48 hours.

Points of attention

When cap is stuck, hold under hot water tap and unscrew. Remove any cured paste in cap with a sharp knife. Bison Rubber Repair cures under the influence of air humidity. As a result, a slight foaming may occur. A low air humidity level could slow down the curing process.

After use:

Stains/residue

Remove adhesive residue immediately with acetone. Dry adhesive residue can only be removed mechanically.

Storage conditions

Store in a dry, cool and frost free place.

16 other products in the same category:
Tube of completely clear mounting adhesive and sealant Bison Poly Max Crystal Express 125g
Special Adhesives

Bison Poly Max Crystal Express Clear Adhesive 125g

Bison
Reference:
GLU245
€8.95
The Bison Poly Max® Crystal Express 125g is an advanced, 100% clear construction adhesive and sealant based on SMP polymer technology. Formulated to be the ultimate universal solution, it effortlessly bonds, fixes, and seals glass, stone, concrete, metals, mirrors, and synthetics. It achieves a very fast initial grab, with its defining quality being the...
Last items in stock
Bison Montage Kit Original Mounting Adhesive Tube 125g
Special Adhesives

Bison Montage Kit Original Mounting Adhesive Tube 125g

Bison
Reference:
GLU235
€5.95
The Bison Montage Kit Original Mounting Adhesive 125g is a professional-grade, heavy-duty mounting adhesive designed for heavy structural bonding and high-end craft supplies projects. Perfectly engineered to bond wood, stone, ceramics, concrete, metal, and various synthetic materials, it features an outstanding initial set via power bonding. Replacing the...
Last items in stock
Product added to wishlist
Product added to compare.