Wooden Base PLY 2mm 40x60cm
Wooden Base PLY 2mm 40x60cm
Wooden Base PLY 2mm 40x60cm
Wooden Base PLY 2mm 40x60cm

Wooden Base PLY 2mm 40x60cm

Model Making Wood: Balsa, Plywood & MDF
WOO0563
Part.No: 3262
€10.50
Out of Stock

 

This is a high-quality Ceiba Plywood sheet which is suitable for a wide range of applications and is particularly suited to laser cutting. Ceiba is very fast growing and has a much lower density than Birch, meaning that it can be easily laser cut at lower power settings. It machines easily but you should use sharp tools as it is easy to leave a fuzzy surface. This can easily be tidied with a light sand.

This is B/BB grade Ceiba Plywood B grade on the topside and BB grade on the underside.

Please note:

As wood is a natural product, there is often a crook or bow to the sheet. The natural twist might be in excess of 25mm 

The B grade topside shows the natural look of the wood. There will be changes in colour that show the grain pattern. Sound, smooth knots are allowed and these will typically be under 15mm to 35mm in diameter. The surface should normally be free from open knots and plugs. This material should be suitable for paint / stain or a lacquered finish.

BB grade is similar to B grade but allows for larger knots and repairs to the face. Sound, smooth knots are allowed and these will typically be under 50mm in diameter. Open knots can be repaired with wooden plugs. The material should be suitable for applications where the visual look is not critical.

This plywood uses an EN314-2 Class 1 glue which is suitable for Interior (dry) conditions. Interior glue is generally considered the preferred option for materials that are to be laser cut. This is because the exterior glues can cause a more obvious 'burnt' look on and around the area that is cut.

Features:

  • Low density for easier laser cutting.
  • B grade finish on topside.
  • BB grade finish on underside.
  • 3 ply plywood.
  • Interior grade glue.

Contents:

  • 1 x 2mm Ceiba Laser Plywood, 600mm x 400mm Sheet.

Dimensions:

  • Length: 600mm.
  • Width: 400mm.
  • Height: 2mm.
Wood Type
PLY
Dimensions (cm)
40x60
Thickness
2mm
16 other products in the same category:
Product added to wishlist
Product added to compare.