Crystal Clear Lacquer 500ml Satin - Polyvine

Crystal Clear Lacquer 500ml Satin - Polyvine

Varnishes
ART6076
Part.No: 10239
€18.85
Out of Stock

hard and durable, crystal clear, cross linked protection - fast drying, it protects a wide range of surfaces

 
This high quality cross linked lacquer dries to a hard, crystal clear satin or high gloss film, with extremely good sanding properties and is specially formulated to bond to a wide range of surfaces.

It is available in gloss for a shiny finish, satin for depth and a soft sheen, dead flat for a completely shine-free surface.

Specifications

  • Interior and exterior
  • water resistant
  • Stain-resistant
  • abrasion resistant
  • heat resistant
  • quick drying
  • microporous
  • nanotechnology
  • water wash-up
  • food and child safe
  • drying time: 1-2 hours
  • recoat time: 4 hours
  • coverage: 15-20 square metres per litre

Preparation

All surfaces must be clean and free from dust, dirt, oil/resins and contamination.

Application

Ensure the product is well mixed but do not shake. Use a good quality synthetic varnish brush and apply evenly using light brush strokes. Apply the first coat, to prime porous surfaces, dilute with 10% water. and allow to dry. Apply one or two further coats.
It can also be used as a multi surface primer.

Caution

Always apply to a test area before starting work. Do not apply over uncured oil based paint. When applied over emulsion/latex paint, it is possible that the lacquer can draw certain stains through the paint, which would not otherwise be visible.

Storage

Protect from extremes of temperature during storage and application.

health, safety and the environment

Non-hazardous. Ensure good ventilation.
Keep out of reach of children.
Contact with eyes - wash immediately with warm water.
Remove excess from tools and mixing vessels before washing in warm soapy water.
Do not empty into drains or watercourses.
Quantity (ml)
500ml
16 other products in the same category:
Water-Based Polyurethane Satin Interior Varnish 1L Polyvine
Varnishes

Water-Based Polyurethane Satin Interior Varnish 1L Polyvine

Polyvine
Reference:
ART6065
€47.75
The Polyvine Interior Extreme Varnish Satin is a highly durable, water-based polyurethane clear coat designed for interior use. It easily applies to wood, MDF, stone, and concrete, leaving a beautiful, non-yellowing satin finish that enhances the natural grain. Delivering industrial-grade protection against stains, heat, moisture, and scratches, it is the...
Last items in stock
Product added to wishlist
Product added to compare.