Arduino Uno Enclosure - Clear Plastic
Arduino Uno Enclosure - Clear Plastic
Arduino Uno Enclosure - Clear Plastic
Arduino Uno Enclosure - Clear Plastic

Arduino Uno Enclosure - Clear Plastic

Plastic Boxes
ARD905
€5.50
Out of Stock
Clear plastic enclosure for Arduino Uno boards. Snap-fit design with full access to USB, power connector, I/O pins, AREF, ICSP headers and reset button. Dimensions: 7.5 x 6 x 2 cm.

 

The Arduino Uno Clear Plastic Enclosure is a transparent snap-fit protective case designed specifically to fit the Arduino Uno development board. Whether you are prototyping on your desk or presenting a finished project, this enclosure keeps your board safe from accidental short-circuits caused by loose wires, dust, and physical damage — all while keeping every component fully visible through its clear shell.

Key Features

  • Transparent Design: Clear plastic body lets you see your Arduino Uno at all times → make adjustments and read LEDs without opening the case
  • Snap-Fit Assembly: Simply snap the Uno into the bottom half, then clip the two halves together → no tools, no screws required
  • Internal Mounting Bosses: Built-in standoffs hold the Arduino Uno securely in place → prevents the board from shifting or vibrating loose
  • Top Access Cutouts: Openings for all I/O pins, AREF header and ICSP header → full GPIO access without removing the board
  • Reset Button Access: Dedicated cutout on the top panel → reset your sketch any time without disassembly
  • Front Connector Access: Slots for the USB port and DC power barrel jack → power and program your board while it stays protected
  • Lightweight: Only 23 g → adds minimal weight to portable or wearable projects

Compatibility

  • Arduino Uno: Designed specifically for the Arduino Uno form factor — confirmed fit.

Typical Applications

  • Protecting your Arduino Uno on a workbench where loose wires could cause accidental short-circuits
  • Tidying up a completed project for display or demonstration at school or a maker fair
  • Securing an always-on home automation node (e.g., sensor logger, relay controller) from dust
  • Educational environments where boards are shared among multiple students and need extra protection
  • Portable battery-powered Arduino projects that need a neat, finished enclosure

Technical Specifications

SpecificationValue
Compatible BoardArduino Uno
MaterialClear Plastic
Dimensions7.5 × 6 × 2 cm
Weight23 g

FAQ

Q: Can I still upload sketches to my Arduino Uno while it is inside the enclosure?
A: Yes. The front panel has a dedicated slot for the USB connector, so you can connect a USB cable and upload code without opening the case.

Q: Does the enclosure fit Arduino Uno clones or only the official board?
A: The case is designed around the standard Arduino Uno form factor. Most Uno-compatible clones that follow the same PCB dimensions and connector placement should fit, but this is not officially guaranteed.

Package Contents: 1 × Clear Plastic Enclosure for Arduino Uno (2-piece snap-fit, top and bottom halves). Arduino Uno board is not included.

⚠ Note: This enclosure is designed for the Arduino Uno only. It is not compatible with Arduino Mega, Leonardo, or other form factors.
3 other products in the same category:
Product added to wishlist
Product added to compare.