• New
Pinty Plus Evolution clear gloss acrylic varnish spray 400ml, code B199

Gloss Varnish Spray 400ml Pinty Plus Evolution

Varnishes
PAS598
Part.No: B199
€5.95
In Stock
Immediate Dispatch

Clear acrylic spray varnish with a gloss finish from the Pinty Plus Evolution range (ref. B199). It protects and adds shine to wood, metal, stone and some plastics, indoors and outdoors. Dries in about 15 minutes and can be recoated after 5 minutes. The 400 ml can covers approximately 2 m².

 

Gloss Varnish Spray 400ml Pinty Plus Evolution

Pinty Plus Evolution Gloss Varnish (B199) is a clear, colourless acrylic varnish in an aerosol can, designed as a protective topcoat with a smooth, uniform gloss finish. It suits DIY repairs, restoration, model making and craft projects on wood, metal, stone and some plastics, both indoors and outdoors.

  • Gloss, colourless finish: adds shine without changing the colour of the surface
  • Fast drying: dry in about 15 minutes, recoatable after 5 minutes
  • Indoor and outdoor use: protects surfaces exposed to everyday wear
  • Heat resistance: up to 100 °C
  • No mixing balls: the gloss varnish does not need shaking before use

Technical Specifications

Type Acrylic spray varnish
Finish Gloss, colourless
Manufacturer code B199
Content 400 ml (520 cc can)
Coverage approx. 2 m²
Drying time approx. 15 minutes
Recoating after 5 minutes
Heat resistance 100 °C
Use Indoor and outdoor
Surfaces Wood, metal, stone, some plastics
Spraying distance 25–30 cm

Frequently Asked Questions

Can I apply it over painted surfaces?
Yes. It is used as a clear protective topcoat over painted or bare surfaces. Apply it once the paint is dry, on a clean, dry surface, and test on a small area first.

How is it different from the Pinty Plus water-based varnish?
The Evolution gloss varnish is acrylic, suitable for indoor and outdoor use and dries in about 15 minutes. The Pinty Plus water-based varnish is for indoor use only and is mainly intended for crafts and decorative materials.

How do I avoid runs and sags?
Spray from 25–30 cm in thin, quick passes, first horizontally and then vertically. Two thin coats give a better result than one thick coat.

Tip: after each use, turn the can upside down and spray until only gas comes out, so the nozzle does not clog.
Quantity (ml)
400ml
4 other products in the same category:
Product added to wishlist
Product added to compare.