Polyurethane Varnish AQUA Gloss 750ml - Mercola

PARQUET VARNISH AQUA is a one or two component (with catalyst) waterbased polyurethane varnish suitable for wood parquet flooring. It is odourless, easily applied and cures to a beautiful finish that enhances wood’s natural beauty. Does not peel, crack or blister, and it is highly elastic. It contains UV filters for effective protection from exposure to the sun UV rays. It is water repellant, offers effective protection from all weather conditions and enhances the wood’s natural beauty. The final finish is water repellent and highly resistant to ageing. The addition of catalyst improves resistance to mechanical stress and chemicals.

ADVANTAGES

• Odourless
• Contains UV filters
• Excellent penetration
• Highly elastic, does not peel, crack or blister
• Resistance to ageing
• Very easy application
• Application as 1 or 2 component

APPLICATIONS

• Ideal for any type of wood flooring: solid wood, engineered wood, non-plastic synthetic.
• Excellent protection of new wood constructions such as doors, window frames, ceilings, claddings, pergolas, and any other wood surface.
• Protection and maintenance of existing wooden surfaces, constructions and furniture.

Specifications

• Coverage: 9 - 12 m2/Lt
• Thinning: 5 - 10% with clean water (brush, roller), 20 - 25% (spray gun)
• Application: by brush, by roller, by spray gun
• Touch dry: 6 - 10 hours 20oC
• Hard Dry: 48 hours 20oC
• Interior and Exterior Use
• Application temperature: 10oC - 35oC
• Cleaning: with water

SURFACE PREPARATION

New wood: Light sanding to smooth surface if necessary. The substrate should be dry and free from dust, chalk, grease and any foreign material which would affect adhesion. Grease and resins should be removed with nitro solvent.

Previously painted wood surfaces: It is important to remove old varnishes with sanding. Follow with sanding. Remove dust and chalk.

APPLICATION

1. If using as a one component mix material thoroughly for 1-2 minutes and apply first coat.
2. When the first coat is completely dry, rub surface using a No 180 abrasive paper and apply a second coat.
3. Although floors and decks may be walked upon the day following application the secret to obtaining a durable floor finish is to allow the coating to cure for 9 – 14 days before exposing it to heavy use.
4. You must avoid to apply the varnish in heavily – thick coats, since it will wear rapidly.
5. For maximum durability apply three or more finish coats.

MAINTENANCE

Wash occasionally with a mild detergent and water, and rinse thoroughly. Recoat when deterioration is observed. Important: Wood must be dry (12-14% internal moisture)

Important: Wood must be dry (12-14% internal moisture)

PACKAGING
Tin: 750ml

Reference Code: 5688